Table of Contents
Advertisement
*Note:You will also need a printer connected to the computer to print snapshots
or reports.
Probe
The probe provided with the B-Scan Plus is an essential component of the product.
No other probes should be used with the instrument.
Printer
The Accutome B-Scan Plus can utilize any PC compatible printer that is connected
to the B-Scan Plus computer.
Footswitch
The footswitch can be used to start and stop scan image acquisition.
Installing the Software
The Accutome B-Scan Plus software is shipped on a CD which contains all of the
programs you will need to install for proper system operation.
PLEASE READ THROUGH ALL OF THE INSTALLATION INSTRUCTIONS BEFORE INSTALLING
ANY SOFTWARE!!
IMPORTANT:
1.
DO NOT plug the Accutome Probe into the USB port until all application
software and drivers have been installed.
2. Plug the wireless mouse USB adapter (which is found on the underside of
the mouse) into a USB port which will not be used for the Accutome Probe
3. Turn your computer to "On".
4. Follow the steps below to install Accutome's B-Scan Plus software to a
personal computer.
5. Your computer must have Microsoft Windows XP SP2 and .NET Framework
1.1 installed to operate the Accutome B-Scan Plus properly.
Installation - Phase One
Follow the steps below to check for and, if necessary, install .NET Framework 1.1 on
your computer:
1.
Open the Control Panel window by clicking on Start located on the bottom
left corner of the window. Click on Control Panel located on the right side of
the pop-up menu.
2. In the Control Panel window, click on Add or Remove Programs. The Add or
Remove Programs window will appear on the desktop. Scroll down the list
to find Microsoft .NET Framework 1.1 in the Currently Installed Programs list.
If you CAN NOT find Microsoft .NET Framework 1.1 in the list, proceed to step
3 below. If you DO find Microsoft .NET Framework 1.1 in the list, proceed to
install the Accutome B-Scan Plus software found in Installation - Phase
Two on page 10. Be sure to close the Add or Remove Programs window and
the Control Panel window before you proceed.
3. Install the Microsoft .NET Framework 1.1 program which is included on
the Accutome B-Scan Plus installation CD. Install the Microsoft .NET
(800) 979.2020 US & CA • (610) 889.0200 International • +31 (0) 485.350300 Europe •
Getting Started
9
www.accutome.com
Advertisement
Table of Contents
Need help?
Do you have a question about the B-Scan Plus and is the answer not in the manual?
Questions and answers