Page 1
Dream On Me Inc. ASSEMBLY INSTRUCTIONS 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 OFFICE: 732-752-7220 ITEM NO: 655 CUSTOMER SERVICE: 732-366-1788 Read all instructions before assembling crib. Save instructions for future use. Adult assembly required. Small parts may present choking hazard prior to assembly.
Page 3
. Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. Contact DREAM ON ME for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use.
Page 5
CONNECTION HARDWARE a: 1-3/4” Allen head b:Wood dowels (6pcs) c:Allen wrench (1pc) d:3” Allen head bolt (8 pcs) bolt (12pcs) e:Barrel nuts (8 pcs) f: 3/4” Allen head bolt (4 pcs) Do Not Use Power Drills or Drivers PARTS ENCLOSED IN CARTON A: Left head board (1 pc) B: Right head board (1 pc) A1:Left back leg (1pc)
Page 6
STEP 1 Attach left back leg (A1) and left front leg (A2) to left board i s u s t l wood dowels(b). Assemble right head board use the same way . STEP 2 Attach back rail bottom (E) to The right head board (B) and The left head board (A) using bolts(d),barrel nuts(e) by allen wrench(c).
Page 7
STEP 3 Locate the mattress support (G) with tabs . Be sure the smooth side of the mattress support (G) is faced upward . Position the tabs of the mattress support(G) to mount to the selected position onto the legs . Insert the bolts (f) , through the tabs and into thread inserts , then tighten securely with allen...
Page 8
Converting crib to a toddler bed (toddler rail and converting bolts are sold separately) Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you.
Page 9
WARNING ! FOR TODDLER BED USE Failure to follow these warning and the assembly instructions could result in serious injury or death from entrapment or strangulation. DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place items witha string,cord,or ribbon around a child’s neck,such as a hood, strings or pacifier cords.
Page 10
Converting crib to a day bed You have the option to convert crib to a day bed 1:Remove The front rail (F ) 2:Install the mattress support (G) in its lowest position. e bottom bar front legs as the image showed. Model shown is example only.
Page 11
Converting crib to a full size bed II Conversion kit is sold separately You have the option to convert crib to a full size bed II 1:Use the front rail as the headboard of full size bed II; 2:Connect the front rail to the keyslot bedframe which are not included and sold separetely.
Page 12
LIMITED WARRANTY Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
Need help?
Do you have a question about the 655 and is the answer not in the manual?
Questions and answers