Cutting Sets - Unitec 5 1026 Operation And Maintenance Manual

C h a i n S a w
P n e u m a t i c
5 1 0 2 6 – 5 1 0 2 9

Cutting Sets

Labelling
1
2
3
4
1 – Name and adress of the company
2 – Type description
3 – Description of the series (the first two digits refer to the year of manufacturing and the rest
refers to the series)
4 – Indication of the technical ATEX document number
Intended Use
Cutting of wood and plastics in dry, wet and explosive areas (depending on the type and
classification)
Improper Use
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
Operating the machine in an explosive area, for which the machine is not approved.
CS Unitec, Inc. • Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: info@csunitec.com • www.csunitec.com
Translation of the original manual
compiled: 20.04.16
Type
X XXXX 0070
X XXXX 0010
X XXXX 0050
X XXXX 0060
51026_51029_BA_en_Version_05
Bar length
27 cm
43 cm
63 cm
73 cm
Chain pitch
0.404"
Page 4 of 34