Do you have a question about the ONA17AA015 and is the answer not in the manual?
Questions and answers
Melissa
March 2, 2025
I need to set the time without the remote
2 comments:
Melissa
March 2, 2025
@Melissa jacocks
Mr. Anderson
March 2, 2025
To set the time on an Onn ONA17AA015 without the remote, follow these steps:
1. Press the STANDBY button to turn on the unit. 2. Press the MODE/CLK/PROG button until the display flashes the time. 3. Use the TUNE/SKIP buttons to adjust the hour and minute. 4. Press the MODE/CLK/PROG button again to confirm the adjusted time.
Page 1
CD MINI STEREO SYSTEM Model: ONA17AA015 PRODUCT GUIDE...
Page 2
WARNING • Do not ingest the battery, Chemical Burn Hazard • (The remote control supplied with)This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. •...
Page 3
19. Do not install this equipment in a confined or "boxed-in" space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc. 20.
Page 4
• Digital clock • Remote control • Timer • RC A stereo inputs • Vertical loading CD player. • Stereo headphone jack Included • ONA17AA015 • AC adapter • Remote control • Product guide SPECIFICATIONS GENERAL AC Adapter..............Input : 100-240V~50/60Hzz Output:5V 2.3A...
Page 5
INTRODUCTION SETUP CD , BLUETOOTH CLOCK AND ALARM RADIO, AUXILIARY INPUT, AND LINE INPUT...
Page 6
INTRODUCTION 1 . CD DOOR VOLUME 10 . DC IN 2. POWER 3. FUNCTION 11 . HEADPHONE 4. OPEN 12 . SPEAKER OUT -R 5. LCD DISPLAY 13 . SPEAKER OUT -L 6. STOP 14 . AUX IN-R 7. PLAY/PAUSE/PAIRING 15 .
Page 7
DISPLAY PLAY/PAUSE/PAIRING/M+ Press to view the In CD mode, press the PLAY/ clock on the LCD PAUSE/PAIRING/M+ button to play or pause a loaded CD. display. In radio mode, press the button to recall the saved AM or FM STANDBY radio station.In bluetooth mode, Press the STANDBY long press to disconnect.
Page 8
SETUP Power Plug the attached 5V/2.3A adapter into a standard AC power outlet to power the home theater system. Remote Requires 1 CR2025 battery (pre- CR2025 installed) OPEN PUSH Speakers Plug the speaker cables into the corresponding colored speaker outputs.
Page 9
Next, press the PAIRING button on the top of the unit. “ONA17AA015”will appear on your Bluetooth. enabled device Select “ONA17AA015” from the available list and your Bluetooth audio device to connect to the ONA17AA015.If you wish to pair the ONA17AA015 disconnect the current paired Bluetooth audio device or make sure the current device has been moved out of range.
Page 10
If the last paired Bluetooth audio device is powered on and within range with note: Bluetooth enabled, the device will automatically reconnect to the ONA17AA015. CLOCK AND ALARM Setting the Alarm Setting the Clock...
Page 11
RADIO, AUXILIARY INPUT, AND LINE INPUT Using the Auxiliary Input Using the Radio Requi res a RCA Cable (not included) 1 Press the STANDBY button until the unit is turned on. 1 Conne ct an audio device to the AUXILIARY INPUT. 2 Press the FUNCTION button to set the unit to Radio mode as indicate 2 Press the FUNCTION button to set...
Need help?
Do you have a question about the ONA17AA015 and is the answer not in the manual?
Questions and answers
I need to set the time without the remote
@Melissa jacocks
To set the time on an Onn ONA17AA015 without the remote, follow these steps:
1. Press the STANDBY button to turn on the unit.
2. Press the MODE/CLK/PROG button until the display flashes the time.
3. Use the TUNE/SKIP buttons to adjust the hour and minute.
4. Press the MODE/CLK/PROG button again to confirm the adjusted time.
Ensure the correct AM/PM setting is selected.
This answer is automatically generated