Advertisement
3.1
Main body
3.1.1 Removing the Top cover (See Fig.1)
(1) Remove the three screws A attaching the Top cover.
3.1.2 Removing the Front panel (See Fig.2 to 4)
(1) Disconnect the card wire from Front panel connected to
connector
CN202
of the Main board. (See Fig.2)
(2) Disengage four hooks a engaged top side of the Front pan-
el. (See Fig.2)
a
hook
(3) Disengage two hooks b engaged both side of the Front
panel. (See Fig.3)
(4) Disengage three hooks c engaged bottom side of the Front
panel. (See Fig.4)
c
hook
1-10 (No.MB706<Rev.002>)
SECTION 3
DISASSEMBLY
A
Fig.1
CN202
Fig.2
b
hook
Fig.3
Fig.4
3.2
Removing the Blu-ray drive unit (See Fig.5)
(1) Disconnect the connector wire from Blu-ray drive unit con-
nected to connector
CN801
(2) Disconnect the FFC cable connected to connector
of the Main board.
(3) Remove the four screws B attaching the Blu-ray drive unit.
B
3.3
Removing the SMPS board (See Fig.6, 7)
(1) Remove the one screw C attaching the AC jack. (See
Fig.6)
C
of the Main board.
CN802
CN801
CN802
B
Fig.5
Fig.6
Advertisement
