Fujitsu AUXB04GALH Service Manual page 250

11. TOP PANEL removal
Screws
(with washer)
Remove the mounting screws.
12. REACTOR removal
Need remove the POWER PCB.
Remove the DUCT C.
Caution
- Protect the choke coil, wiring, and
pipes from the edge of DUCT C.
Screws
POWER PCB
Remove the mounting Screws.
To DIODE BRIDGE
Remove the Wire and
mounting screw.
Screws
(with washer)
Screw (serrated)
DUCT C
To POWER PCB
06-10
Remove the TOP PANEL.
DUCT C
Screws
Screws
Remove the REACTOR.