ODES UTVS DOMINATOR X- 2 Assembly Instructions Manual page 37

LED Lightbar 1-2
Align the LED lightbar on the bracket and
make sure the lightbar is straight. Once it
is straight you can then bolt the lightbar to
the bracket.
Once the lightbar is secure, you can then
push the wire through the hole on the
roof.
Once you push it through the hole on the
roof you can then run the wire down the
passenger side of the rollcage and down
into the hood to connect it to the bat-
tery. Once you have the wires connected
be sure to test the lightbar to ensure it it
working properly.