Soundweb BLU-100 Installation Manual

London

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Soundweb

London

BLU-100

Installation Guide

5033738-D

Table of Contents

Need help?

Do you have a question about the BLU-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Soundweb BLU-100

Page 1 Soundweb London BLU-100 Installation Guide 5033738-D...
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING FOR YOUR PROTECTION READ THE FOLLOWING: READ THESE INSTRUCTIONS. KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS. FOLLOW ALL INSTRUCTIONS. The symbols shown above are internationally accepted symbols that warn DO NOT USE THIS APPARATUS NEAR WATER. of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous CLEAN ONLY WITH A DRY CLOTH.
Page 4: Electromagnetic Compatibility
IMPORTANT SAFETY INSTRUCTIONS ELECTROMAGNETIC COMPATIBILITY DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules and the Product Manufacturer’s Name: BSS Audio Specifications noted on the Declaration of Conformity. Operation Manufacturer’s Address: 10653 S. River Front Parkway, Suite 300 South Jordan, Utah 84095, USA is subject to the following two conditions: •...
Page 5: Consignes De Sécurité Importantes
CONSIGNES DE SÉCURITÉ IMPORTANTES AVERTISSEMENT POUR VOTRE SÉCURITÉ LIRE ATTENTIVEMENT : LIRE CES CONSIGNES. CONSERVER CES CONSIGNES. RESPECTER TOUS LES AVERTISSEMENTS. SUIVRE TOUTES LES CONSIGNES. NE PAS UTILISER CET APPAREIL PRÈS DE L’EAU. Les symboles illustrés ci-dessus sont des symboles acceptés internationalement qui avertissent des dangers potentiels relatifs à...
Page 6: Compatibilité Électromagnétique
CONSIGNES DE SÉCURITÉ IMPORTANTES DÉCLARATION DE CONFORMITÉ COMPATIBILITÉ ÉLECTROMAGNÉTIQUE Cet appareil est conforme au volet 15 des règles du FCC et aux spécifica- Nom du fabricant : BSS Audio Adresse du fabricant : 10653 S. River Front Parkway, Suite 300 tions techniques évoquées dans la Déclaration de conformité.
Page 7: Product Registration/Warranty
Product Registration/Warranty To register your product, please visit http://bssaudio.com/en-US/support/warranty_registration. For warranty information, please visit http://bssaudio.com/en-US/support/warranty_policy. Mechanical Installation If the unit is likely to undergo extreme vibration through extensive road trucking and touring, the unit must be supported at the rear and/or sides to lessen the stress on the front mounting flange. Rear rack supports are provided to reduce stress on front mounting flange.
Page 8: Front Panel
Front Panel Input/Output Channel Monitoring Each channel has the following LED indicators: Clip Indicates clipping in the analogue domain for each input or output channel. The LED will illuminate at +18.5dB. Signal The Signal LED will illuminate for each input or output channel when the signal reaches or exceeds the signal threshold of -20dB.
Page 9 Audio Cable Wiring All audio and GPIO connections to the BLU-100 are via Klippon pluggable terminal block connectors (also known as BL, Phoenix or Combicon). 12-way female Klippon connectors are supplied for making these connections. Audio Input and Output Wiring Convention Soundweb products provide cable shielding ‘back from the destination’...
Page 10: Rear Panel
The London BLU link is a point-to-point digital audio bus with 256 audio channels at 48K sample rate or 128 audio channels at 96K sample rate. The BLU-100 allows access to channels 1-48 of this bus, at 48K sample rates. The physical connection is made with Cat 5e cable from the OUT port of one device to the IN port of another device.
Page 11 2-Wire Mode In this mode the twelve CONTROL INPUTS are internally ‘pulled up’ to +5V DC via a 4.7kOhm resistor. Therefore, no external voltage source is needed to create contact closure to ground for switches such as mute buttons or, resistance to ground (for other multi-state or continuous controls such as Parameter Presets or faders).
Page 12 OPTO Output In addition to the six standard LOGIC OUTPUTS, there is an isolated output, which fails safe (open circuit) if the unit becomes faulty. 47kOhm 10K-100kOhm linear potentiometer potentiometer unconnected ladder ladder switch switch 2 wire mode 3 wire mode +supply voltage relay...
Page 13: Technical Specifications
Technical Specifications FRONT PANEL LED INDICATORS: Signal Clip, Signal Present, 48V (input only) Other: Control link status and activity for Ethernet and RS-232 connections (COM); Device configuration status (STAT); Error (ERR); Power/Locate (PWR) ANALOGUE INPUTS: 12 electronically balanced on Phoenix/Combicon removable screw connectors Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,...
Page 14 WATCHDOG OUTPUT: Phoenix/Combicon connector for failsafe control Opto Output Current: 14mA maximum Withstanding Voltage: 80V maximum (Off) Series Impedance: 220 Ohms (isolated) CONTROL NETWORK Connectors: RJ45 Ethernet connector Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch Maximum Number of Nodes: BLU link AUDIO NETWORK Connectors:...