Table of Contents
Advertisement
HOW TO MOVE THE INCLINE TRAINER
Before moving the incline trainer, insert the key
into the console, raise the incline to the maximum
incline level, remove the key, and unplug the power
cord.
Due to the size and weight of the incline trainer,
moving it requires two or three persons. Hold the
uprights firmly near the console. Tip the incline trainer
back until it rolls freely on the wheels. CAUTION: To
decrease the possibility of injury or of damage to
the incline trainer, do not lift the incline trainer by
the plastic belly pan. Do not pull on the console or
the TV.
Console
TV
Upright
Wheel
Carefully roll the incline trainer on the wheels to the
desired location, and then lower it to the level position.
CAUTION: To reduce the risk of injury, use extreme
caution while moving the incline trainer. Do not
attempt to move the incline trainer over uneven
surfaces.
Make sure that the incline trainer rests firmly on the
floor. If the incline trainer rocks even slightly, turn the
Leveling Feet (77) as needed until the rocking motion
is eliminated.
Belly
Pan
39
77
77
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X15i and is the answer not in the manual?
Questions and answers
why does it change level at shutdown, it doesn't go to zero goes 3 or 4 degress up or down never the same
The NordicTrack X15i incline trainer does not automatically return to zero at shutdown because it is designed to maintain its last used incline setting. The manual does not specify an automatic reset to zero upon shutdown. Users may need to manually adjust the incline before turning off the machine if they prefer it to be at zero.
This answer is automatically generated