Threading The Machine; Needle Threader - Bernette b33 Instruction Manual

Threading the Machine

Raise the thread take-up lever to its highest position by
turning the handwheel toward you.
Raise the presser foot.
Place a spool on the spool pin as shown, with thread
coming from back of the spool.
Draw the thread into thread guide using both hands.
While holding the thread near spool, draw thread
down into the tension area and then around the
check spring holder.
Firmly draw the thread up and through the take–up
lever from right to left.
Then pull the thread downwards and guide it into
the thread guide on the bottom of the sewing head,
moving from right to left.
Pull the thread downwards and, on the left side of
the needle bar, insert it into the thread guide.
Thread the needle eye from front to back.

Needle threader

Raise the needle to its highest position by turning
the handwheel toward you. Pull down the needle
threader as far as it will go.
Turn the needle threader away from you so the
hook comes out through the needle eye from
behind.
Pull the thread around the guide and under the
hook. Take particular care with the point of the
needle when doing so.
Hook
Turn the needle threader toward you to pull the
thread through the needle eye. Release the needle
threader slowly while holding the thread end with
your hand. A loop of the thread is pulled up through
the needle eye.
13