Installing The M.2 Solid State Drive (Ssd); Hard Drive; Removing The Hard Drive Assembly - Dell Precision 3520 Owner's Manual

Installing the M.2 Solid State Drive (SSD)

NOTE: Before installing SSD card, you must make sure that your computer has a 92 Whr battery.
1 Insert the SSD into the connector on the computer.
2 Tighten the M2.0x3.0 screw to secure the SSD to the computer.
3 Affix the adhesive tape above the SSD card.
NOTE: For models shipped with NVMe SSDs, the SSD requires installation of a thermal plate over it.
4 Install the:
a battery
b base cover
5 Follow the procedure in

Hard drive

Removing the hard drive assembly

1 Follow the procedure in
2 Remove the:
a base cover
After working inside your computer.
Before working inside your computer.
Removing and installing components 13