To do...
•
Display RRPP group
configuration information
•
Display detailed RRPP
information
•
Display RRPP statistics
•
Clear RRPP statistics
RRPP configuration examples
Single ring configuration example
Networking requirements
As shown in
Device A, Device B, Device C, and Device D form RRPP domain 1. Specify the primary control
•
VLAN of RRPP domain 1 as VLAN 4092. RRPP domain 1 protects VLANs 1 through 30.
Device A, Device B, Device C, and Device D form primary ring 1.
•
Specify Device A as the master node of primary ring 1, GigabitEthernet 1/0/1 as the primary port
•
and GigabitEthernet 1/0/2 as the secondary port.
Specify Device B, Device C, and Device D as the transit nodes of primary ring 1. Specify their
•
GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the secondary port.
Figure 20 Network diagram for single ring configuration
Configuration procedure
Configure Device A.
1.
Use the command...
display rrpp ring-group [ ring-group-id ] [ | {
begin | exclude | include } regular-expression
]
display rrpp verbose domain domain-id [ ring
ring-id ] [ | { begin | exclude | include }
regular-expression ]
display rrpp statistics domain domain-id [ ring
ring-id ] [ | { begin | exclude | include }
regular-expression ]
reset rrpp statistics domain domain-id [ ring
ring-id ]
20,
Figure
69
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in user
view