Philips 6400 Installation Manual page 22

Getting the iPronto Up and Running
Adjusting the Power On Settings
1 You can power on the iPronto in several ways after it was powered off.
2 Select the General tab in the System Settings.
In the Power on by section, select:
Power Button & Touch & Tilt to power on the iPronto when the Power Button is pressed, when the screen is
tapped or when the iPronto is tilted.
Power Button & Touch to power on the iPronto when the Power Button is pressed or when the screen is
tapped.
Power Button to power on the iPronto only when the Power Button is pressed.
Adjust the System Sound Settings
You hear the system sounds when you tap a button on the touch screen, go to the Applicaton Settings, go to the
System Settings, and so on. You can decide to switch the system sounds on or off. When the system sounds are
switched on, you can adjust the volume by scrolling the scrollwheel.
1 Select the General tab in the System Settings.
2 In the 'System sounds' section, select:
On (adjust volume with scrollwheel): if you want to hear the system sounds;
Off: when you do not want to hear the system sounds.
iPronto User Guide
19