Related Manuals for Berkel Flywheel P15 series
Summary of Contents for Berkel Flywheel P15 series
- Page 1 User Manual User Manual for model User Manual for model P15 Series P15 Series Date 12-12 12-07 UM – CodeF2 - Rev. 0.1...
- Page 2 User Manual P15 Series P15 Series 12-12- -07 UM – CodeF2 - Rev. 0.1...
-
Page 3: Table Of Contents
User Manual LIST OF CONTENTS Pag. 1. INTRODUCTION ........................................1.1.Purpose of the manual ........................................1.2.Keeping the manual ........................................1.3.Use of the machine 2. GENERAL INFORMATION ............................2.1.Machine limits, general safety regulations Machine limits, general safety regulations .................... -
Page 4: Introduction
User Manual For any explanation or doubts on the contents of this For any explanation or doubts on the contents of this 1. INTRODUCTION manual, please contact immediately the manufacturer please contact immediately the manufacturer or an authorised technical assistance service and quote or an authorised technical assistance service and quote 1.1 PURPOSE OF THE MANUAL the paragraph number of the required subject. -
Page 5: Guarantee And Manufacturer's Responsibility
User Manual 2.2 GUARANTEE AND For a safe use of the machine follow the instructions below For a safe use of the machine follow the instructions below MANUFACTURER’S RESPONSIBILITY MANUFACTURER’S RESPONSIBILITY The guarantee of a good function The guarantee of a good function and a complete - Install the machine according to the instructions in the machine according to the instructions in conformity of the machines, that are to be used... -
Page 6: User's Obligations
User Manual 2.3 THE USER’S OBLIGATIONS 2.4 PLATES The user must scrupulously observe the instructions in The user must scrupulously observe the instructions in this manual for the manufacturer’s guarantee to be this manual for the manufacturer’s guarantee to be The following plate is installed on the machine: The following plate is installed on the machine: valid and particularly:... -
Page 7: Technical Characteristics
User Manual 3. TECHNICAL CHARACTERISTICS 3. TECHNICAL CHARACTERISTICS 3.1. OVERAL SIZE Models A mm 180 mm B mm 210 mm C mm 180 mm D mm 430 mm E mm 240 mm F mm 525 mm G mm 735 mm H mm 460 mm I mm... -
Page 8: Products That Can Be Sliced
User Manual 3.3 PRODUCTS THAT CAN BE SLICED 3.3 PRODUCTS THAT CAN BE SLICED 3.4 PRODUCTS THAT CANNOT BE SLICED 3.4 PRODUCTS THAT CANNOT BE SLICED The following are products that can be sliced: The following are products that can be sliced: The following are products that cannot be sliced because The following are products that cannot be sliced because they could cause damage to people and equipment:... - Page 9 User Manual Supply of machine only: - Lift the machine carefully - Put the machine in its place of installation. Put the machine in its place of installation. Supply of machine and support column: Supply of machine and support column: - Place the machine on the support column.
- Page 10 User Manual Assembly of the flywheel: - Move the machine carriage all the way towards Move the machine carriage all the way towards the operator; - Take out the taper pin from the flywheel shaft Take out the taper pin from the flywheel shaft: Attention: hammer the pin at the tapered end hammer the pin at the tapered end (smaller diameter);...
-
Page 11: Main Components
User Manual 1. Food plate 10.Vertical sliding food press Vertical sliding food press 2. Slice deflector 11.Rapid overplate advance lever Rapid overplate advance lever 3. Food press 12.Handwheel overplate advance Handwheel overplate advance 4. Sliding overplate 13.Regulating knob for slice thickness Regulating knob for slice thickness 5. -
Page 12: General Description
User Manual 4.3 GENERAL DESCRIPTION 4.3.1 Risks during use The slicing machine has been designed and made to offer The slicing machine has been designed and made to offer DO NOT use the machine if yo DO NOT use the machine if you are not in perfect maximum safety when in use, during cleaning and maximum safety when in use, during cleaning and psycho-physical condition and DO NOT let anyone... -
Page 13: Installation
User Manual 5. INSTALLATION 5.1 INSTALLATION OF THE MACHINE 5.1 INSTALLATION OF THE MACHINE If a support column (optional) is not used, install the If a support column (optional) is not used, install the machine on a surface which is level, dry and suitable for machine on a surface which is level, dry and suitable for the weight of the machine plus the food to be sliced;... -
Page 14: Using The Slicing Machine
User Manual 6. USING THE SLICING MACHINE 6.1 LOADING THE GOODS - Using the flywheel (1) bring the carriage (2) all Using the flywheel (1) bring the carriage (2) all forward (towards the operator); - Pull back the sliding overplate (3) completely (away from Pull back the sliding overplate (3) completely (away from the blade) using the handwheel (4) or the rapid advance the blade) using the handwheel (4) or the rapid advance... -
Page 15: Cleaning The Slicing Machine
User Manual 6.3 CLEANING THE SLICING MACHINE 6.3 CLEANING THE SLICING MACHINE 6.3.1 GENERAL INFORMATION The machines must be properly cleaned at least once The machines must be properly cleaned at least once a day, if necessary even more. If the machines have not been used for a while they If the machines have not been used for a while they must be cleaned before use as well. -
Page 16: Maintenance And Repairs
User Manual 7. MAINTENANCE AND REPAIRS 7.1 GENERAL INFORMATION The operator is allowed to carry out the following maintenance: - Blade sharpening, periodically; the interval and , periodically; the interval and length of the sharpening obviously depend on the use of the sharpening obviously depend on the use of the machine (work times and type of product used). -
Page 17: Lubricating The Guide Bars And Overplay
User Manual 7.3 LUBRICATING THE GUIDE BARS OF THE 7.3 LUBRICATING THE GUIDE BARS OF THE CARRIAGE AND OVERPLATE - After each cleaning operation of the machine put a few After each cleaning operation of the machine put a few drops of oil in the hole along the sliding bar (1) and on drops of oil in the hole along the sliding bar (1) and on regulating knob for slice thickness (2);... -
Page 18: Dismantling The Slicing Machine
User Manual 8. DISMANTLING THE SLICING MACHINE 8. DISMANTLING THE SLICING MACHINE The machines are made up of: - Aluminium alloy structure; - Insertions and various in stainless steel; - Electric parts and wires, etc.; - Electric motor; - Plastic materials, etc. If disassembly and dismantling are to be carried out by If disassembly and dismantling are to be carried out by a third party, only consult firms that are authorised in...
Need help?
Do you have a question about the Flywheel P15 series and is the answer not in the manual?
Questions and answers