Cabling Ip4Ww-080E-B1; Figure 2-68 Connectors Of 080E-B1 - NEC SL1100 Hardware Manual

ISSUE 4.1 (R5.1)
• Use cable protectors in case the cables run on the floor.
• Aerial distribution wiring is not allowed.
• Trunks must be installed with lightning protectors.
• Only SL1100 terminals (12TXH, 24TXH) may be connected to a SL1100 digital port. Do not connect
any other terminal as damage may result.

3.4.1 Cabling IP4WW-080E-B1

This IP4WW-080E-B1 PCB provides two RJ-61 connections for digital extensions.
Before plugging in the Multiline Telephone, DSS Console, Single line
Telephone or Doorphone, ensure Main KSU is powered off.
Only SL1100 terminals (12TXH, 24TXH) may be connected to a SL1100
digital port. Do not connect any other terminal as damage may result.
3.4.1.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for Digital extension connections.
Hardware Manual
J102 J101
ESI 5-8 ESI 1-4
5 4 3 6 2
Port 1 Port 2 Port 3 Port 4
T R
T: Tip
R: Ring
Modular Cable
(2-wire, Straight)
Exit Help
ABC DEF
Flash Transfer
1 2 3
GHI JKL MNO
Mute DND
4 5 6
PQRS TUV WXYZ
Clear/Back
7 8 9
0
Speaker Hold
Multiline Telephone

Figure 2-68 Connectors of 080E-B1

7 1 8
T R
DSS Console
SL1100
2-45