Operating The Tv; Tuning The Television - Beko D5 Service Manual

6. OPERATING YOUR TV
TV controls
Programme selection
Press the + or - buttons on the TV or
remote control or press a Numeric
button to select a programme.
To select a programme whose
number is greater than 9 using the
numeric buttons, press the -/-- button
first and then press the two Numeric
buttons. For example, to select
programme 12, press the -/-- button
followed by 1 and then 2.
You can also select a program by
pressing in the OK button.
Press the OK button and a blue box
will appear on the screen with
programme numbers on it.
Use the Program ▲ andProgram ▼
buttons to scroll through the
programme numbers. When you find
the program number you want press
the OK button again.
Press the TV/TX or TV MENU button
to close the blue box.
Volume
Press the Volume + or Volume – button
on the TV or the VOL+ or VOL- button
on the remote control. A sound level bar
will appear on the screen.
Mute
To mute the sound press the Mute
button on the remote control. A
loudspeaker symbol will appear on the
screen.
Press the Mute button again to restore
the sound. The symbol will disappear.
Pressing VOL+ buttons will decrease
the volume without restoring. But
pressing the VOL- button will increase the
volume without restoring.
Swap
Allows you to swap between the
program you are watching and the
last selected program. i.e. If you were
watching Program 1 and change
to Program 11, press the Swap
button to go back to Program 1. Press it again
to return to Program 11.
Info
Press the P100 button and the
program number and program name
will be displayed for a few seconds.
AV
For use when you are connecting an external
source to your TV (Video recorder,
DVD player etc.) via the SCART
socket or RCA sockets. See
'Connecting external equipment'.
Press the AV button to select your input as
follows:
1 Scart models:
1 AV1 when using SCART socket 1.
2 AV2 when using the RCA sockets of the TV.
(Optional)
3 AV2-S when using the S-video socket and
RCA audio sockets of the TV. (Optional)
Press the AV button again to return
to TV.

Tuning the television

There are two ways of tuning your television:
Manual, where you control the tuning process
or Autoprogram where the television does it all
automatically.
Please Note
If the TV is set to a channel with no signal the
TV will return to standby after 5 minutes. The
time remaining is displayed on the screen.
Manual tuning
Tuning the TV is accessed through the SETUP
menu.
- 8 -
.