Connecting To The Internet Using Wi-Fi; Connecting To Other Devices Using Bluetooth - Huawei MediaPad T3 User Manual
Hide thumbs
Also See for MediaPad T3:
- Quick start manual (213 pages) ,
- Quick start manual (101 pages) ,
- Quick start manual (96 pages)
Table of Contents
Advertisement
2
Touch More > Tethering & portable hotspot.
3
Switch on Bluetooth tethering to share your mobile data connection.
4
On the Bluetooth screen, touch
access to share your mobile Internet.
Connecting to the Internet using Wi-Fi
Connecting to a Wi-Fi network
1
Go to
Settings.
2
Touch Wi-Fi and turn on the Wi-Fi switch. Your device will display a list of available Wi-Fi
networks.
Refresh the list: Touch Scan to refresh the list of available Wi-Fi networks.
l
Manually add a network: Swipe down to the bottom of the menu and touch Add
l
network.... Follow the onscreen instructions to enter the network name and password
manually.
3
Select the Wi-Fi network you want to connect to:
If the Wi-Fi network does not require a password, your device will connect automatically.
l
If the network is protected, enter the password when prompted and touch Connect.
l
Connecting to a Wi-Fi network using Wi-Fi Protected Setup (WPS)
WPS allows your device to connect to a WPS-enabled router without entering a password.
1
Go to
Settings.
2
Touch Wi-Fi and switch on Wi-Fi.
3
Touch
> Advanced Wi-Fi settings. There are two options:
Touch WPS connection and press the router's WPS button.
l
Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.
l
Connecting to other devices using Bluetooth
Enabling Bluetooth and pairing with other devices
1
Go to
Settings.
2
Touch Bluetooth and switch on Turn on.
Ensure that the device you want to pair with is visible.
3
Select the device you want to pair with and follow the onscreen instructions.
Unpairing Bluetooth devices
1
Go to
Settings.
next to the paired device,and then switch on Internet
Network and Sharing
16
- Quick Links:
- Initial Setup
- Getting Started
- Home Screen
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MediaPad T3 and is the answer not in the manual?
Questions and answers
I would like to know why it is taking so long to charge my battery on a Huawei MediaPad T3 10.0. I have had it on a charger for 36+ hours, and so far it is at 73 percent. It should be fully charged by now. Please advise. Thank you for your time and have a good weekend
joan_bover@yahoo.ca
Your Huawei MediaPad T3 may be taking too long to charge due to several factors mentioned in the manual:
1. Ambient Temperature: Charging times depend on the surrounding temperature. If it is too hot or too cold, charging may slow down.
2. Battery Level: Charging speed can vary based on the remaining battery level.
3. Device Usage During Charging: Using your device while charging can slow down the process.
4. Blocked Ventilation: If the device or charger is covered, it may overheat and charge more slowly.
5. Battery or Charger Issues: There may be a problem with the battery, charger, or cable.
To improve charging speed, ensure the device is in a cool location, avoid using it while charging, and check the charger and cable for any damage.
This answer is automatically generated
@Mr. Anderson There is another reason this is taking so long to fully charge. I was using a power bar initially, but I thought the direct approach may work better. I plugged it directly into the wall, and the results were great. You may want to pass this info on if the question should arise again. Thanks for your time. It is greatly appreciated. Have a good one.