Mb-132 Installation - Icom IC-M506 Instruction Manual

12
CONNECTIONS AND MAINTENANCE

MB-132 installation

An optional MB-132
transceiver to a flat surface, such as an instrument panel.
KEEP the transceiver and microphone at least 1 meter
away from your vessel's magnetic navigation compass.
q
Using the template on page 112, carefully cut a hole into
the instrument panel, or wherever you plan to mount the
transceiver.
w
Slide the transceiver through the hole, as shown below.
105
FLUSH MOUNT is available for mounting the
e
Attach the clamps on either side of the transceiver with 2
M5 × 8 mm supplied bolts.
r
Tighten the end bolts on the clamps (clockwise) so that the
clamps press firmly against the inside of the instrument
control panel.
t
Tighten the locking nuts (counterclockwise) so that the trans-
ceiver is securely mounted in position, as shown below.
y
Connect the antenna and power cable, then return the in-
strument control panel to its original place.
r
t