Cleaning With The Brush; Lubrication - Panasonic ER-GB70 Operating Instructions Manual

4. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
5. Apply the oil to the blade after
drying.
6. Attach the comb attachment and
blade to the trimmer.
The mark on the left means suitable for cleaning
under an open water tap.

Cleaning with the brush

1. Remove the trimmer from the AC
adaptor.
Make sure that the trimmer is
turned off.
2. Remove the comb attachment.
3. Hold the main body, place your
thumb against the blades and then
push them away from the main body.
4. Brush off any hair trimmings from the main body and from
around the blade.
PB013791 - ER-GB70 _01EN_07-22-16.indd 15
5. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
6. Apply the oil to the blade.
7. Attach the comb attachment and blade to the trimmer.

Lubrication

Apply the oil to the trimmer before and after each use.
Apply a drop of the oil to the points indicated by the arrows.
Remounting the blade
Fit the mounting hook into the blade
mounting on the trimmer and then push
in until you hear a click.
15
2016/7/22 17:16:05