Automatic Carpet Height Adjustment Maintenance and Care Replacing the Vacuum Bag Removing/Reinstalling the Bottom Plate Replacing the Belt Resetting the Circuit Breaker Problem Solving Guide Troubleshooting Visit Simplicity Vacuums Online Contact Your Local Retailer Key Replacement Parts For Best Performance Warranty...
IMPoRtAnt sAFetY InstRUCtIons When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE IMPoRtAnt: The manufacturer cannot accept responsibility for damage caused when the appliance is not used according to the instructions, or for uses other than those for which it was intended.
PoLARIZAtIon InstRUCtIons Power Cord, 2-Wire Polarized Cord To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way.
AsseMbLIng tHe VACUUM Attaching the Handle to the Vacuum NOTE: Do not plug in the vacuum until it is completely assembled. The vacuum cleaner handle is packed as a separate component that requires assembly. Fig. 1 • Release the handle bracket from the handle tube by removing the two screws (Fig.
Page 8
AsseMbLIng tHe VACUUM Positioning the Power Cord: • Loosen, but do not remove, the screw holding the upper cord hook (Fig. 1). • Position the cord between the cord hook and the vacuum tube (Fig. 2). Re-tighten the screw. • Once the cord is secured by the cord hook, proceed with wrapping the cord.
oPeRAtIon This vacuum is intended for household use only. Turning the Vacuum On/Off Locate the switch on the back side of the nozzle to the left of the handle tube (Fig. 1). Simply press the switch with your foot to turn the vacuum On or Off.
MAIntenAnCe AnD CARe Replacing the Vacuum Bag NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag. • Unzip outer cloth bag (Fig. 1). • Remove used bag by pressing the bag holder tab and pulling bag off vacuum (Fig. 2). Discard used bag.
MAIntenAnCe AnD CARe Removing and Reinstalling the Bottom Plate CAUTION: To reduce the risk of injury from moving parts, unplug the vacuum before servicing. To Remove Bottom Plate: • After unplugging the power cord, turn the vacuum cleaner over, exposing the Fig.
MAIntenAnCe AnD CARe Replacing the Belt CAUTION: To reduce the risk of injury from moving parts, unplug the vacuum before servicing. • Turn the unit over and remove the bottom plate (see “Removing and Reinstalling the Bottom Plate” on pg. 9). •...
Plate” on pg. 9), reset the circuit breaker by pressing the Circuit Breaker Reset Button (Fig. 1), plug in power cord, and turn unit on. If the unit fails to turn on, return it to an Authorized Simplicity Retailer for service.
• Change vacuum bags once a month or when the bags are 2/3 full to maximize cleaning performance. • Always use genuine Simplicity vacuum bags and replacement parts. Use of other products may result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum warranty.
Authorized Simplicity Retailer. A proof-of-purchase and product serial number will be required before service is rendered. To locate your nearest Simplicity Retailer, please call 888.9.SIMPLY or visit the Simplicity website at www.SimplicityVac.com. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER...
Need help?
Do you have a question about the Freedom S10E and is the answer not in the manual?
Questions and answers