Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Clear Spot Voyager IMW-C910W
Summary of Contents for Clear Spot Voyager IMW-C910W
- Page 1 IMW-C910W User Manuel...
-
Page 2: Table Of Contents
Table of list Chapter 1. Attention ..............................4 Chapter 2. Introduction & Requirements ......................4 Introduction of goods ............................4 What is the IMW-C910W? .......................... 4 System Requirements..........................4 Specification ..............................4 The points of name & Components list ...................... 5 Components List in the package. - Page 3 Description of Web User Interface ......................12 Introduction ..............................12 Home Menu ..............................13 LAN settings ............................... 15 WiMAX Configuration ............................. 18 Parametric Data description ........................18 Network Information description ......................19 Device Information ............................20 Frequency Setting ............................20 Authentication Setting ..........................
-
Page 4: Chapter 1. Attention
Chapter 1. Attention Don’t use in high humidity place. Use in the clean place. Install on the safe place without dropping. Don’t use and keep around electromagnetic waves. Don’t put the goods on heavy things. ... -
Page 5: The Points Of Name & Components List
The points of name & Components list Components List in the package. ① IMW-C910W ② Adaptor [5V / 2A] (Optional) ③ User’s Manual ④ Plug ⑤ USB Cable Points of name & Function ① USB Port : Battery charging and Tethered operation ②... - Page 6 ③ Battery Status : battery status and power (Color : Yellow / Green / Red) ④ WiFi Status: WiFi On/Off Status USB Port : (Color : Green) ⑤ WiMAX Status: WiMAX Signal strength (Color : Yellow / Green / Red) LED Status Scenario WiMAX Signal LED Power Off...
-
Page 7: Chapter 3. How To Use The Imw-C910W
Chapter 3. How to use the IMW-C910W Power ON/OFF Power ON : Push the power button for 3 Seconds. Power OFF : Push and hold the power button for 20 Seconds. How to charge battery The built-in battery can be charged from either USB cable or wall Charger (Optional) -
Page 8: Setting Of The Wifi Ap
Setting of the WiFi AP Notice : Configuration of WiFi AP has to be set to “Obtain IP address and DNS sever address automatically”. Setting with Window XP <Start><Connect to><Wireless Network Connection> Choose WiFi AP of IMW-C910W in the list... -
Page 9: Setting With Window 7
Setting with Window 7 <Start><Control Panel><Network and Internet><Connect to Network> Choose the WiFi AP of IMW-C910W in the list Setting with Mac OS Click the wireless Icon on the menu Choose the WiFi AP of IMW-C910W in the list... -
Page 10: Setting Of Usb (Rndis)
Setting of USB (RNDIS) Notice : 1. Your PC connected to web server of IMW-C910W through WiFi. 2. Driver of RNDIS can down load from web sever of IMW-C910W. 3. Refer to USB Driver Page No. XX for download. Setting with Window XP 1. -
Page 11: Setting With Window 7
Setting with Window 7 1. IMW-C910W should be connected with PC by USB cable. 2. Below is each step of RNDIS installation. <Start><Control Panel><Network and Internet><Connect to Network>... -
Page 12: Chapter 4 Configuring Cm
Chapter 4 Configuring CM Connect to Web CM (Web Connection Manager) Start CM - Use web browser to connect Web CM - Type Address 192.168.1.1/admin ※ Microsoft Internet Explorer is recommended Input ID/Password - A Pop-up window will requests for specific ID and Password to enter into Web CM ID : admin / Password : admin Description of Web User Interface Introduction... -
Page 13: Home Menu
① Main Menu Main Menu help user to choose settings of LAN/WLAN, WiMAX frequency, Authentications, Device management. ② Sub Menu Sub Menu shows detail categories of Main Menu ③ Main Window Main Window shows status of device or setting parameters ④... - Page 14 It shows IP Address, Subnet Mask and setting of DHCP Server ③ WiMAX status information It shows connection status of WiMAX and Network...
-
Page 15: Lan Settings
LAN settings ① LAN Status It shows web address of local area network information. ② LAN Setting - Local IP Address: Input desired IP address that user want to use for Local Area Network - Subnet Mask: Input subnet mask to allocated IP address - DHCP Server: When DHCP is ‘Disabled’, please set IP address of client with static address. - Page 16 ③ WiFi Status It shows Wi-Fi’s SSID, Channel and Tx Power ④ WiFi Setting - Network Name: User can set preferred name of network name The device comes with SSID of ‘IMW-C910W‘. This SSID can be changed as preferred. - Security Setting: Default setting of Security is ‘Disabled’.
- Page 17 - Key Pass Phrase: WEP Key is generated automatically. Input random character to generate key. Please make a separate note the key in order to connect to the device. - WPA: The WPA protocol implements the majority of the IEEE 802.11i standard, and was intended as an intermediate measure to take the place of WEP while 802.11i was prepared.
-
Page 18: Wimax Configuration
technique is used to permit communications by external hosts with services provided within a private local area network. ● Port Forwarding List : ● DMZ Host : ● Remote Admin : WiMAX Configuration The parameter of WiMAX configuration are listed as Parametric Data, Network Info, Device Info, Frequency and Authentication Parametric Data description ●... -
Page 19: Network Information Description
This indicates antenna level information of device ● PHY Statistics Information This indicates statistics of antenna level of device. ● PHY Burst Statistics Information This indicates modulation information of device. Network Information description ● Auto Refresh : When check box is enabled, Network and MAC status of device in monitored in real time. -
Page 20: Device Information
Device Status: This indicates connection status of WiMAX device. BSID: This indicates BSID of WiMAX network. NAP(Network Access Provider): This indicates operator’s ID. Frequency: This indicates connected frequency. IP Address: This indicates Static IP Address acquired from BS. Subnet Mask: This indicates Static Subnet Mask acquired from BS. Default Gateway: This indicates Gateway acquired from BS. -
Page 21: Authentication Setting
5. ⑤ Input Bandwidth as 10000. 6. ⑥ Input FFTSize as 1024 7. Select ⑦ 8. Select ‘Reboot’ in main window Authentication Setting ① PKM: Please select if the certificate is desited to be used.. ② EAP Method: When PKM is available, select the authenticiation method as EAP-AKA/EAP- TLS/EAP-TTLS. -
Page 22: Administration Setting
※ Example: EAP-TLS 1. Select ① as Enable 2. ② Select EAP-TLS 3. ③ Register Root CA Certificate 4. In case there is Sub CA Certificate, register in ④ 5. ⑤ Register Client Certificate file 6. ⑦ Input private password 7. -
Page 23: Firmware Information
setting information ② This provides IP Address, Subnet Mask and DHCP Server setting information WiMAX status information ③ This provides WiMAX connection status information. Firmware information kernel version: This indicates version of device OS rootfs version: This indicates system file version firmware version: This indicates software (firmware) version WCM version: This indicates Web CM version Administration setting... -
Page 24: Upgrade Description
Upgrade description ① This is to return to factory default configuration. ② Device supports firmware update with binary file When check box of Keep WiMAX config files is selected, the previous configuration will remain after update After selecting file and click ‘update’ to start upgrade ③...
Need help?
Do you have a question about the Spot Voyager IMW-C910W and is the answer not in the manual?
Questions and answers