Special Functions - Hegel H90 User Manual

Special Functions

Display On/Off
The DISP button on the RC10 remote
control may be used to turn the display of
the H90 on or off. Hold the DISP button for
more than 1 second to turn the display off.
Press the button to turn the display on.
Home Theater or Standard Analog Input
All inputs can be changed into a Home
Theater input. This will set the Volume at a
fixed high volume level. Use the RC10
remote to change the settings. Hold
computer play until the setup menu
appears. Use computer prev/next to
navigate to "HT" and press computer play
to select this submenu. Now use computer
next/prev to maneuver to the input you want
to change into a fixed level input. Press
computer Play to toggle between a fixed
level input or normal variable input. Now
don't press anything for 15sec, and the H90
will return to normal mode.
WARNING: Activating Home Theater sets
the volume at a high fixed level. This may
harm your speakers if a fixed level input is
connected.
16
Reset to Factory Default Settings
Use the RC10 remote to change the
settings. Hold computer play until the setup
menu appears. Use computer prev/next to
navigate to Factory Reset. The H90 will be
reset to factory settings. This will clear all
user defined settings, including IP settings,
and reinitialize H90.