Aiming Beam - LUMENIS SELECTA Operator's Manual

Aiming beam

The aiming beam intensity can be adjusted with the aiming beam intensity
control knobs located on the slit lamp (shown on the "Slit Lamp Controls"
illustration), or by using the remote control aiming beam pushbutton. To
decrease the intensity, press the lower portion of the button. To increase the
intensity, press the upper portion of the button.
Adjusting the aiming beam intensity
(Photodisruptor screen shown)
Laser Basics  59
Increase intensity
Decrease intensity
Aiming beam
intensity display
Selecta
PBL200051, Rev J