Protecting Against Unauthorized Access; Resetting The Base To The Factory Settings; Base Reset; System Pin - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / registr_sett.fm / 28.07.2009
•
Protecting against
unauthorized
Protect the system settings of the base
with a PIN known only to yourself. The sys-
tem PIN must be entered when, for exam-
ple, registering/de-registering a handset
to/from the base or when restoring the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (default setting: 0000) to a 4-
digit PIN known only by you.
Gigaset S795: Setting a system PIN facili-
tates remote operation of the
machine (
Ï
¢
v
~
~
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000:
1. Disconnect the power cable from the
base.
2. Hold down the registration/paging key
on the base while reconnecting the power
cable to the base.
3. Hold down the key for at least 5 sec-
onds.
4. The base has now been reset and the
system PIN set to 0000.
Please note
All handsets are de-registered and
must be re-registered. All settings are
reset to the factory settings.
access
answering
¢
page 41).
¢ ¢
System

System PIN

Enter the current system PIN
and press .
§OK§
Enter your new system PIN
and press .
§OK§
•
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated deactivated,
u
The system PIN is not reset.
Ï
¢ ¢ ¢
v
System
~
Enter the system PIN and
press .
§OK§
Press the display key.
§Yes§
Setting the base

Base Reset

57