Ink Selector Assy; Ink System Mechanism - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.9 Ink System Mechanism

3.4.9.1 Ink Selector Assy

1. Discharge ink. (p358)
2. Remove the Front Cover. (p142)
3. Remove the Control Panel Cover.
4. Remove the Right Upper Cover.
5. Remove the Right Cover. (p139)
6. Remove the Left Cover. (p137)
7. Unlock the carriage, and move the CR Unit to the left end.
Be sure to move the CR Unit to the left end before performing the
C A U T I O N
following steps. Performing the following step with the CR on the
platen may damage the Printhead.
8. Remove the CR Cover. (p149)
9. Disconnect the connectors (CN105, CN106) from the SUB Board.
10. Disengage the hook, and remove the tube mounting plate.
11. Remove the three screws that secure the Ink Selector Assy.
A) Silver, Phillips, Bind P-tite M3x8: three pieces
DISASSEMBLY & ASSEMBLY
(p136)
(p138)
(p124)
Disassembly and Assembly Procedure
A
Ink Selector Assy
CN105 CN106
Figure 3-161. Removing the Ink Selector Assy
Revision A
A
Hook
Tube mounting plate
A
229
Confidential