PEUGEOT 5008 2017 Handbook page 110

Ease of use and comfort
F After having displayed the operating time,
press buttons 4 and 5 simultaneously within
10 seconds.
This symbol will flash.
F Adjust the time by pressing buttons 1: in
10 minute increments to a maximum of
30 minutes.
F Simultaneously press buttons 4 and 5 to
save the operating time.
This symbol will be displayed.
The factory value setting is 30 minutes.
108
Deferred switching on
You must program your departure time for the
system to automatically calculate the optimal
time to start the heater.
Programming the departure time
F Press buttons 1 to display the programmed
time.
This symbol will be displayed.
F After having displayed the programmed
time, press buttons 4 and 5 simultaneously
within 10 seconds.
This symbol will flash.
F Set the time by pressing the buttons 1.
F Simultaneously press buttons 4 and 5 to
save it.
This symbol will be displayed.
Activation/Deactivation
F After having displayed the programmed
time using button 1, press button 5 until the
message "OK" is displayed.
When the signal has been received,
the message "OK" is displayed
along with this symbol.
This indicator lamp lights up until the
heater starts.
This symbol is displayed when the
heater starts.
HTM: Heat Thermo Management