2.1
Requirements
Chapter 2 ServeRAID
Controller Hardware
Installation
This chapter describes the procedures used to install the ServeRAID
M1115 SAS/SATA controller. It consists of the following sections:
•
Section 2.1, "Requirements"
•
Section 2.2, "Quick Installation"
•
Section 2.3, "Detailed Installation"
•
Section 2.4, "Connecting a ServeRAID-M1115 SAS/SATA Controller
to a Drive Backplane on an Enclosure"
•
Section 2.5, "After Installing the Controller"
The following items are required for installation:
•
A ServeRAID M1115 SAS/SATA controller
•
A host system with an available PCI Express expansion slot
•
The ServeRAID M Documentation CD containing the documentation
•
The necessary internal cables
•
SAS physical disks or SATA II physical disks (Mechanical or Solid
State Devices, SSDs)
Note:
For optimal performance, use an uninterruptible power
supply.
ServeRAID M1115 SAS/SATA Controller User's Guide
2-1