Convertible Top; Convertible Top Design - Audi TT Roadster Service Training

Convertible top

Convertible top design

Fabric convertible top with space-saving
folding system
A special new feature of the new Audi TT Roadster
is the Z-fold system of the fabric convertible top, as
a result of which the convertible top takes up only a
small amount of space when folded down.
With this space-saving folding system, the front
section of the roof lies on top of the cloth like a
cover and locks into place to lie flush with the body.
Front roof cross member
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
10
Tensioning cable for
convertible top cover
Roof cross member 1
Roof linkage 1
The side openings for the drive motor of the
convertible top mechanism are covered by
convertible top flaps. As a result, there is no need
for a tonneau. The linkage for both the fully
automatic and manual convertible tops is made
from a combination of steel and aluminium
components and, as a result, is exceptionally light.
Roof cross member 2
Roof linkage 2
Main linkage
Main bearing
Roof cross member 3