Local Layout Control - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents

Local layout control

You can choose a local layout using the Call Control page.
The term layout is used to describe the various ways the
videos from the conference participants and a presentation
can appear on the screen. Different types of meetings may
require different layouts.
Whether or not snapshots of input sources are shown as illustrated, depends on the software version, configuration,
and options installed on the video system. Refer to the About snapshots and remote monitoring sections
newer or ► TC7.3.0 to TC7.3.2).
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface Web interface
Navigate to: Call Control
Change the layout
Click Change
your preferred layout in the window
that opens.
The set of layouts to choose
from depends on the system
configurations.
You may change the layout while
in a call.
(► TC7.3.3 or
System settings
layout, and choose
20
Administrator Guide
Setting passwords
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Appendices