Tray Disc - JVC CE MANUALXV-N450BUC Service Manual

3.3 DVD MECHANISM DISASSEMBLY
3.3.1 MAIN BASE (FIG. 4-1)
3.3.1.1 Clamp Assembly Disc
(1) Place the Clamp Assembly Disc as Fig. (A)
(2) Lift up the Clamp Assembly Disc in direction of arrow(A).
(3) Separate the Clamp Assembly Disc from the Holder
Clamp.
3.3.1.1.1 Plate Clamp
(1) Turn the Plate Clamp to counterclockwise direction and
then lift up the Plate Clamp.
3.3.1.1.2 Magnet Clamp
3.3.1.1.3 Clamp Upper
Fig.4-1
3.3.2 TRAY DISC (FIG. 4-2)
(1) Insert and push a Driver in the emergency eject hole(A) at
the right side, or put the Driver on the Lever(B) of the Gear
Emergency and pull the Lever(B) in direction of arrow so
that the Tray Disc is ejected about 15~20mm.
(2) Pull the Tray Disc until it is separated from the Base Main
completely.
Fig.4-2
(No.YD118)1-9