Philips 227E3QSU/93 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 227E3QSU/93
  6. Service manual
Philips 227E3QSU/93 Service Manual

Philips 227E3QSU/93 Service Manual

21.5"w lcd color monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

21.5"W LCD Color Monitor
Service
Service
Service
Description
Table of Contents......................................................1
Revision List.............................................................2
Important Safety Notice............................................3
1. Monitor Specifications............................................5
2. LCD Monitor Description........................................7
3. Operation Instructions............................................8
3.1 General Instructions.....................................8
3.2 Control Buttons..........................................8
3.3 OSD Menu......................................................9
4. Input/output Specification..................................10
4.1 Input Signal Connector.......................................10
4.2 Resolution & Preset Modes.................................10
4.3 Pixel Defect Policy.......................................11
4.4 Failure Mode of Panel...................................13
5. Block Diagram...............................................14
5.1 Scaler Board.....................................................14
5.2 Power Board.......................................................15
6. Schematic Diagram.............................................. 16
6.1 Scaler Board..............................................16
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN
SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Copyright 2011 Philips Consumer Lifestyle
227E3QSU/69
227E3QSU/93
Page
Description
6.2 Power Board.......................................................21
6.3 Key Board.................................................23
6.4 LED Board.................................................24
7. PCB Layout................................................25
7.1 Scaler Board............................................25
7.2 Power Board.............................................27
7.3 Key Board.................................................29
7.4 LED Board.................................................29
8. Wiring Diagram.............................................30
9. Scaler Board Overview..................................31
10. Mechanical Instructions...............................32
11. Repair Flow Chart........................................34
12. ISP Instructions..................................................38
13. DDC Instructions................................................45
15. Monitor Exploded View.......................................56
17. Different Parts List......................................66
18. General Product Specification.........................67
SAFETY NOTICE
Subject to modification ○
K
Jul.11, 2011
Chassis: Meridian 3
Page

Advertisement

Table of Contents
loading

Related Manuals for Philips 227E3QSU/93

Summary of Contents for Philips 227E3QSU/93

  • Page 1: Table Of Contents

    CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES Copyright 2011 Philips Consumer Lifestyle Subject to modification ○ Jul.11, 2011...

  • Page 2: Revision List

    Meridian 3 Revision List Version Release Date Revision History Jul.11, 2011 Initial release, Draft Version...

  • Page 3: Important Safety Notice

    Meridian 3 Important Safety Notice This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. The...
  • Page 4 Meridian 3 IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging”...

  • Page 5: Monitor Specifications

    Meridian 3 1. Monitor Specifications Technical specifications Picture/Display LCD Panel Type TFT-LCD Backlight Panel Size 21.5" W (54.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.248 x 0.248 mm Brightness 250 cd/m² SmartContrast 20,000,000:1 Contrast Ratio (typ.) 1000:1 Response Time (typ.) 5 ms Optimum Resolution 1920 x 1080 @ 60Hz...
  • Page 6 Black (Black) / Blue (Front) Finish Glossy Note: 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support...

  • Page 7: Lcd Monitor Description

    Meridian 3 2. LCD Monitor Description The LCD monitor will contain a scaler board, a power board, a LED board and a key board. The scaler board houses the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC inverter voltage to drive the backlight of panel and the scaler board chips each voltage.

  • Page 8: Operation Instructions

    Meridian 3 3. Operating Instructions Connecting to your PC 3.1 General Instructions Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor. By changing these setting, the picture can be adjusted to your personal preference.

  • Page 9: Osd Menu

    3.3 OSD Menu On-screen Display (OSD) is feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly...

  • Page 10: Input/Output Specification

    Meridian 3 4. Input/ Output Specification 4.1 Input Signal Connector Hot plug detect D-sub Connector T.M.D.S. data0- Pin No. Signal Name T.M.D.S. data0+ T.M.D.S. data0 shield Green/ SOG No Connect Blue No Connect Sense (GND) T.M.D.S clock shield Cable Detect (GND) T.M.D.S.

  • Page 11: Pixel Defect Policy

    There are three unavoidable. No manufacturer can guarantee that types of bright dot defects: panels will be free from pixel defects, but Philips One lit red, green or blue sub pixel guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty.
  • Page 12 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.

  • Page 13: Failure Mode Of Panel

    Meridian 2 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.

  • Page 14: Block Diagram

    Meridian 3 5. Block Diagram 5.1 Scaler Board 04.SCALER 02.INPUT VCC3.3 VCC3.3 SOG_DET VCC1.8 SOG_DET SOG_DET VCC1.8 05.PANEL INTERFACE EDID_WP AHS0 EDID_WP AHS0 AHS0 AVS0 AVS0 AVS0 PA[0..9] DDCSDA1 DDCSDA1 DDCSDA1 PA[0..9] PA[0..9] DDCSCL1 DDCSCL1 DDCSCL1 VGA_CABLE_DET VGA_CABLE_DET VGA_CABLE_DET PB[0..9] 02.D-SUB INPUT PB[0..9] PB[0..9]...

  • Page 15: Power Board

    Meridian 3 5.2 Power Board AC input Bridge Rectifier Transformer EMI filter Rectifier and Diodes (T901) Filter Start Resistor (R905, R908, R909) Q901 Feedback Circuit PWM Control Photocoupler LD7750RGR (IC902)   (IC901) Boost Circuit Feedback Circuit LED Bar Setup-up Controller OZ9998AGN OVP Circuit (IC801)

  • Page 16: Schematic Diagram

    Meridian 3 6. Schematic 6.1 Scaler Board 715G4502M01000004K Remark: Parts position can be searched by using FIND function in PDF. DET_VGA R102 100R 1/16W 5% VGA_CABLE_DET VGA_CABLE_DET 5 VGA_5V DDCSCL1 R101 DDCSCL_A DDCSCL1 100R 1/16W 5% VGA_5V VSIN0 BIN0- HSIN0 BIN0 R103 R104...
  • Page 17 Meridian 3 Remark: Parts position can be searched by using FIND function in PDF. R127 DVI_CABLE_DET 5 100R 1/16W 5% DVI5V CN102 3,5,7 VSYNC DET_DVI DVI5V SY NC GND SCL_DVI R128 100R 1/16W 5% D102 DDC SCL SDA_DVI R129 100R 1/16W 5% ESD_DVI BAV70 DDC SDA...
  • Page 18 Meridian 3 Remark: Parts position can be searched by using FIND function in PDF. VCC1.8 VCC1.8 7 PB[0..9] R402 NC/2K2 1/16W 5% PB[0..9] FB401 U401 NT68660FG FB401 and FB402 is NC LVB3P R403 NC/2K2 1/16W 5% CVDD 300OHM LVB3M LVBCKP VCC3.3 LVBCKM LVB2P...
  • Page 19 Meridian 3 Remark: Parts position can be searched by using FIND function in PDF. PA[0..9] PB[0..9] PA[0..9] PB[0..9] LVB3P CN408 LVA3P LVB3M CONN LVA3M LVBCKP LVB0M RXO0- LVACKP LVBCKM LVB0P RXO0+ LVACKM LVB2P LVB1M RXO1- LVA2P LVB2M LVB1P RXO1+ LVA2M LVB1P LVB2M RXO2-...
  • Page 20 Meridian 3 Remark: Parts position can be searched by using FIND function in PDF. VCC3.3 CN702 U701 NC/AP2114H-3.3TRG1 FB701 0 OHM +-5% 1/8W 3,4,5 VCC3.3 5 VCC3.3 ON/OFF NC/CONN C701 R702 22K 1/16W 5% 10N 50V +5V 3,4,5 CN701 R703 100R 1/16W 5% Adj_BACKLIGHT 5 C706...

  • Page 21: Power Board

    Meridian 3 6.2 Power Board Power 715G4750P02000001S Remark: Parts position can be searched by using FIND function in PDF. 47 OHM 1/4W R901 C901 C924 BD901 D2SB80 R902 47 OHM 1/4W 2N2 500V 2N2 500V FB901 R937 NC Coil T901 L902 POWER X'FMR BEAD...
  • Page 22 Meridian 3 Converter 715G4711P0B0020040 Remark: Parts position can be searched by using FIND function in PDF. Vout NC CN803 CONN R829 1R 1% R844 C811 CN801 R828 1R 1% +16V F801 0R05 1/4W L801 47UH ZD801 C810 R827 1R 1% Q801 SM3100B 4.7UF 100V...

  • Page 23: Key Board

    Meridian 3 6.3 Key Board 715G4799K01000004F Remark: Parts position can be searched by using FIND function in PDF. C001 1000pF 50V C002 C003 10uF 6.3V 100N 16V Buttons U001 Button_1 R001 560R 1/16W 5% INPUT Button_2 R002 560R 1/16W 5% Power Button_3 R003 560R 1/16W 5%...

  • Page 24: Led Board

    Meridian 3 6.4 LED Board 715G4864T01000004F Remark: Parts position can be searched by using FIND function in PDF. CN002 CONN LED_white LED001...

  • Page 25: Pcb Layout

    Meridian 3 7. PCB Layout 7.1 Scaler Board 715G4502M01000004K Remark: Parts position can be searched by using FIND function in PDF. CN701 CN702 CN409 R456 R455 C714 C709 C717 C707 C708 C701 CN408 R710 C706 CN410 R711 R798 R702 R713 R706 R704 CN411...
  • Page 26 Meridian 3...

  • Page 27: Power Board

    Meridian 3 7.2 Power Board Power 715G4750P02000001S Remark: Parts position can be searched by using FIND function in PDF. GND1 CN902 BD901 J905 C801 CN801 D902 D904 J801 R932 D901 L801 Q903 R935 Q901 ZD902 L901 C908 C927 FB801 F902 R919 J904 R903...
  • Page 28 Meridian 3 Converter 715G4711P0B0020040 Remark: Parts position can be searched by using FIND function in PDF. R814 C813 CN802 C801 R825 IC801 Q801 F801 L801 C810 CN801 ZD801 CN804 CN803...

  • Page 29: Key Board

    Meridian 3 7.3 Key Board 715G4799K01000004F Remark: Parts position can be searched by using FIND function in PDF. R005 ZD002 CN001 U001 R001 R002 R003 ZD004 7.4 LED Board 715G4864T01000004F Remark: Parts position can be searched by using FIND function in PDF. LED001 CN002...

  • Page 30: Wiring Diagram

    Meridian 3 8. Wiring Diagram Panel CN801 Converter CN902 CN701 CN408 Board Power Board Scaler U401 CN404 Scaler Board CN802 CN901 CN101 CN102 Key Board CN002 CN001 LED Board...

  • Page 31: Scaler Board Overview

    Meridian 3 9. Scaler Board Overview FFC Connector DC-DC Scaler IC Flash ROM VGA EEPROM DVI EEPROM...

  • Page 32: Mechanical Instructions

    Meridian 3 10. Mechanical Instructions Note: Take the 227E3L for example (the way of 227E3Q disassembly is almost the same as 227E3L) Step 2: Remove the rear cover 1. Open the latches and along the red arrowhead direction as the picture to open other latches. Step 1: Remove the stand base ASSY 1.
  • Page 33 Meridian 3 Step 4: Remove the mainframe 2. Remove the six screws to remove the power board 1. Disconnect the FFC cable. and scaler board from the main frame. 2. Disconnect the lamp cable. 3. Disconnect all the connectors. Step 5: Remove the boards 1.

  • Page 34: Repair Flow Chart

    Meridian 3 11. Repair Flow Chart 1. No Power No power Check power cable is Re-plug the power cable tightened? Check Power “On/Off” Turn on the Power “On/Off” switch is “On”? Check the LED Check the AC power indicator is OK? Replace the power board and check connections Replace main board and check connections Replace key board and check connections...
  • Page 35 Meridian 3 No Video (Power LED White) No Video (Power LED White) Press the power Replace the main board button is OK? Replace the power The end board and connection Replace the main The end board and connection Check the FFC cable Replace the FFC cable or panel or panel...
  • Page 36 Meridian 3 3. DIM DIM (image overlap, focus or flicker) Reset in factory mode The end Set to the optimal The end frequency, select the recommended frequency Readjust the phase and pixel The end clock in the user mode Pull out signal cable and Check the signal cable check “Self Test Feature and the PC...
  • Page 37 Meridian 3 4. Color is not optimal Color is not optimal Color shift Miss color Reset the factory mode Replace the signal cable In the user mode, set the “color settings” until customer satisfy The end Pull out the signal cable and check the screen color display is normal? Replace the signal cable or PC...

  • Page 38: Isp Instructions

    Meridian 3 12. ISP Instruction Note: Take the 227E3L ISP SOP for example (the 227E3Q SOP is almost the same as 227E3L) When do the parts, need the tools as follow: 1. An i486 (or above) personal computer or compatible. 2.
  • Page 39 Meridian 3 Click “Finish” to complete the USB serial port driver installation.
  • Page 40 Meridian 3 12.3 Install the ISP tool and run it: 1. Double-click to install ISP program. 2. Double-click to run the ISP tool. 3. Set the parameters to restore the HDCP key.
  • Page 41 Meridian 3 4. Setup ISP tool. Click “Setup ISP tool” to open the configuration window. 5. Configuration for ISP tool. Tick “FTDI”.
  • Page 42 Meridian 3 6. Load the F/W you want to upgrade. 7. Start to program. Click “Auto” to start programming.
  • Page 43 Meridian 3 8. Programing success. There will be the message in the red frame after successful programming. 12.4 Check the firmware version and reset the factory setting Check the firmware version 1. Connect the video source and power off the monitor. 2.

  • Page 44: Troubleshooting

    Meridian 3 Reset the factory setting Power on the monitor and open the user menu. Do factory reset: Setup – Reset – Yes. Factory reset will turn off “Burn in” mode which screen color switches among red, green, blue and black. 12.5 Troubleshooting: When can’t upgrade, please retry below several ways to upgrade.

  • Page 45: Ddc Instructions

    Meridian 3 13. DDC Instruction Note: Take the 227E3L EDID SOP for example (the 227E3Q SOP is almost the same as 227E3L) General DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect repaired monitor’...
  • Page 46 2. Put the EDID data and “config.ini” files into one folder named Philips 227EL. 3. Copy the folder named Philips 227EL to the “DDC” folder (It must be “DDC” instead of other names), and put the “DDC” folder and “HDMISinglePort.exe” into the same folder.
  • Page 47 Meridian 3 2. Choose the Analog +DVI ”, and click “Loadfile” to set the parameters as the below picture: 3. Click the “Next” to load the EDID file.
  • Page 48 Meridian 3 4. Select the “Philips 227EL” and then click “OK”, the tool will read the EDID information: 5. Choose the “Only connect VGA” and “Write SN”, and key in the 14 digital S/N that must be the same as the S/N...
  • Page 49 Meridian 3 6. Click the “Program” to start programming after monitor power on. When it shows “Analog: PASS!, SN write OK! and DVI: PASS!”. The EDID and SN writing process are finished. 13.5 Check the SN 1. Connect the video source and power on monitor. 2.
  • Page 50 Meridian 3 227E3Q EDID Analog 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C 8D C0 94 BA 0A 00 10| 10 15 01 03 6E 30 1B 78 2A FC A5 A0 54 4E A0 27 20| 12 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32...
  • Page 51 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz <-Detailed Timing Descriptions: -> FC (Monitor Name): Philips 227EQ FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
  • Page 52 Meridian 3 Digital 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C 8D C0 94 BA 0A 00 10| 10 15 01 03 80 30 1B 78 2A FC A5 A0 54 4E A0 27 20| 12 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32...
  • Page 53 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz <-Detailed Timing Descriptions: -> FC (Monitor Name): Philips 227EQ FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.

  • Page 54: White Balance, Luminance Adjustment

    Meridian 3 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (Philips LEDFGA.DDCI), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing b.
  • Page 55 Meridian 3 5. Color Temp confirmation Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC. 11500K 9300K 8200K...

  • Page 56: Monitor Exploded View

    Meridian 3 15. Monitor Exploded View...

  • Page 57: Recommended & Spare Parts List

    Meridian 3 16. Recommended & Spare Parts List Recommended Parts List for 227E3QSU/69 Item Location PCM Codes Description Remark FQ106 A34G2670AMCA1M0130 BEZEL L215W-Uph1c-s1 FQ004 KEPCAQP3 KEY BOARD ASSY FQ015 LEPCAQP1 LED BOARD ASSY E750 750GBG215F3C13M0PH LM215WF3-SLC1 GZ LGD E750 750GBG215F3C13N000 LM215WF3-SLC1 GZ LGD FQ004 PLPCAB521GQAW...
  • Page 58 IC903 056G 563354 Shunt. Reg. TL431-A-TA TO-92 F902 084G 56 4 B FUSE 4A 250V F901 084G 56 4 B FUSE 4A 250V Spare Parts List for 227E3QSU/93 Location PCM Codes Description E08902 089G1745GAA AC DVI CABLE E08902 089G1745HAA AC...
  • Page 59 Meridian 3 CN101 088G 35315FVCL HF HF D-SUB CONN V/T 15P BLUE H=10.4 CN102 088G 35424F VC HF DVI CONN V/T 24P H=10.4 WITH SCREW HF X401 093G 22 51 YC YC-49S-12M30PF30PPM25ohm 12M 30ppm 30PF X401 093G 2251B J CRYSTAL 12MHZ NXS12.000AC30F-KAB10 C433 067G 3051013PB EC 105C 100uF M 16V 5*11mm...
  • Page 60 Meridian 3 R408 061G04024700FT RST CHIP 470R 1/16W 1% R142 061G0402471 JI TEST ONLY RST 0402 470R 5% 1/16W TA-I R142 061G0402471 JT RST CHIP 470R 1/16W 5% TZAI YUAN R422 061G0402472 JF RST CHIPR 4.7KOHM +-5% 1/16W FENGHUA R422 061G0402472 JI TEST ONLY RST CHIP 4.7K 5% 1/16W TA-I R114...
  • Page 61 Meridian 3 FB409 071G 56K121 M CHIP BEAD 120OHM 6A MGLB2012-120T-LF FB401 071G 56V301 B CHIP BEAD 0805 300R 25% 700mA FB408 071G 56V301 M CHIP BEAD 0805 300R 25% 700mA D101 093G 64 42 L DIODE LBAV70LT1G SOT-23 LRC D101 093G 64 42 P BAV70 SOT23 BY PAN JIT...
  • Page 62 Meridian 3 CN901 087G 501 48 S HF AC SOCKET 3P ST-01EG-BBBS-3000(HF) CN901 087G 501 48 HC HF AC SOCKET V/T 3P DB-14-04H H=21.6 HF BD901 093G 50460 43 BRIDGE GBL208 2A/800V GBL BD901 093G 50460 51 BRIDGE D2SB80 2A 800V GBL CN902 095G 825 7D702 HARNESS 7P(SCN)-9P(A2004) 80mm...
  • Page 63 Meridian 3 F801 061G1206000 JF RST CHIPR MAX0R05 1/4W FENGHUA R825 061G1206000 JI RST 1206 MAX0R05 5% 1/4W R801 061G1206308 JF RST CHIPR 0.3 OHM +-5% 1/4W FENGHUA R801 061G1206308 JI RST CHIPR 0.3 OHM +-5% 1/4W 1206 C814 065G060310131J CAP CHIP 0603 100P 50V NP0 +/-5% C815 065G060333412K...
  • Page 64 Meridian 3 R912 061G1206103 JT RST CHIPR 10KOHM +-5% 1/4W TZAI YUAN R916 061G1206155 JF RST CHIPR 1.5MOHM +-5% 1/4W FENGHUA R918 061G1206155 JT RST CHIPR 1.5MOHM +-5% 1/4W TZAI YUAN R911 061G1206220 JF RST CHIPR 22 OHM +-5% 1/4W FENGHUA R911 061G1206220 JT RST CHIPR 22 OHM +-5% 1/4W TZAI YUAN...
  • Page 65 Meridian 3 C910 067G 2046812KT CS CAP 680uF 10V 8*11 mm C911 067G215C4713LT EC 470UF 20% 16V 8*9 C916 067G215C4706LT EC 47UF 20% 35V 8*9 C910 067G 2046812LT CAP CS 680UF 20% 10V 8*11.5 D902 093G1100 1152T RECTIFIER PR1007R 1A 1000V DO-41 D904 093G 6451652T 1N4148...

  • Page 66: Different Parts List

    Meridian 3 17. Different Parts List Diversity of 227E3QSU/93 compared with 227E3QSU/69 227E3QSU/93 227E3QSU/69 Location PCM Codes Description Location PCM Codes Description E08902 089G1745HAA AC DVI CABLE E08902 089G 725HAA 2G D-SUB CABLE 1500MM E08901 089G414A15N IS POWER CORD 1500MM China Reg.

  • Page 67: General Product Specification

    3.15 Audio 3.16 Pixel-orbiting function (Option) 4. Visual Characteristics 4.1 Test Conditions 4.2 Brightness/ Brightness Uniformity 4.3 Color Temperature Adjustment 5. Mechanical Characteristics 5.1 Cosmetic 5.2 Mechanical Data Files 5.3 Location of Philips Logo 5.4 Gap between Panel and Front Bezel...

  • Page 68: Foreword

    All optical characteristics are determined according to panel specification after warming up longer than 30 minutes. 2. Product Profile This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt base. 2.1 EDID Header 1 User visible strings on .inf file...

  • Page 69: Lcd

    Scaler should be capable of below items. 1) Scaler must support color engine for Image enhancement feature (SmartImage) 2) Scaler must have enough memory to support PerfecTune feature and Philips OSD 3) Scaler must support SmartContras, 20M: 1 DCR preferred...

  • Page 70: Interface Signals

    Meridian 3 detection and save the related date into memory. Resolution ≦ 800x600, do not do auto adjustment. Note A: source maybe D-SUB, DVI, HDMI. 3.1 Interface signals a) D-Sub Analog Input signal : Video, Hsync, Vsync Video : 0.7 Vp-p, input impedance, 75 ohm @DC Sync.

  • Page 71: Timing Requirement

    Meridian 3 3.2.2 DVI Cable The input signals are applied to the display through DVI-D cable. Length : Please refer to M3 cable bundle summary file Connector type : DVI-D male with DDC-2B pin assignments White connector thumb-operated jackscrews With transplant pin protective cover. Pin Assignment: Signal Assignment Signal Assignment...

  • Page 72: Osd/Keypad Functions

    English, French, German, Spanish, Italian, Russian, OSD Translation OSD_String_M3_201 Simplified Chinese, Portuguese, Turkish (9) 10322.xls Power On Logo: Power On Show up Philips logo 3 seconds Change to input signal. Power ON Logo Philips_Logo_1920x This picture is reference only. The official drawing 1080.bmp...

  • Page 73: Vga Display Identification

    In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and EDID V1.3 3.11 DDC /CI Support and Smart Manage /Control In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with, Philips SmartManage, SmartControl V6.1, and Portrait Display Tune at least 3.12 Hot-key definition...

  • Page 74: Audio

    Meridian 3 3.15 Audio 3.15.1 Frequency Response The amplifier and speaker combination shall provide a frequency response of 300Hz to 20 KHz, with +/-3db variation over the entire response range. 3.15.2 Total Harmonic Distortion Total harmonic distortion shall be limited to 5% THD at the maximum wattage speaker rating specified in section 1.3 at 1 KHz, when the input is 1.0Vrms.

  • Page 75: Visual Characteristics

    Meridian 3 4. Visual Characteristics 4.1 Test conditions Unless otherwise specified, this specification is defined under the following conditions. Input signal: As defined in 3.3, 1920 x 1080 non-interlaced mode (1920 x 1080 @60Hz), signal sources must have 75 ohm output impedance. Luminance setting: controls to be set to nits with full screen 100 % duty cycle white signal Warm up: more than 30 minutes after power on with signal supplied.

  • Page 76: Mechanical Characteristics

    Base / Rear to be Flame Retardant UL 94-HB. All major plastic parts (bezel, back cover) need to be molded from same resin. Plastic resin type selection should be referred to “plastic-Philips Pool monitor”. 5.12 Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet.
  • Page 77 MMD request metal plate in Kensington hole. 5.15 Label Regulatory label / Carton label should follow Philips requirement. Detail document refer to Philips Engineering Reference Book. 5.16 Product dimension / Weight (Refer to Philips approved SHT 191/ SHT560) Unit dimension Packed unit dimension: Net weight Gross weight 5.17 Transportation...
  • Page 78 Meridian 3 5.18 Pallet / Container loading (Refer to Philips approved SHT 560) Transportation standards refer to TYE-M0002, UAN-D1534 and UAW-0309. Air shipment - Sea container 20'(pallet/slip sheet) Sea container 40'(pallet/slip sheet) Sea container 40' High Cube (pallet/slip sheet) Land 45‘ Truck and Trailer (800X1200mm pallet) Land 45‘...
  • Page 79 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the manufacturer's approved type.

This manual is also suitable for:

227e3qsu/69

Table of Contents