Advertisement
Quick Links
ONE YEAR LIMITED WARRANTY
The PH-200, manufactured by HM Digital, Inc. ("the Company") is warranted to the purchaser
against defective materials and workmanship for one (1) year from the date of purchase.
What is covered: Repair parts and labor, or replacement at the Company's option.
Transportation charges for repaired of new product to be returned to the purchaser.
What is not covered: Transportation charges for the defective product to be sent to the
Company. Any consequential damages, incidental damages, or incidental expenses, including
damages to property. This includes damages from abuse or improper maintenance such as
tampering, wear and tear, water damage, or any other physical damage. The Company's
products are not waterproof and should not be fully submerged in water. Products with any
evidence of such damage will not be repaired or replaced. See additional note below. (NOTE -
The PH-200 is watertight and completely submersible. Please ensure that the battery
compartment and probe gasket ring are firmly tightened before submersing in water. The
warranty does not cover water damage to the PH-200 due to parts not securely closed.)
How to obtain warranty performance: Attach to the product your name, address, description
of problem, phone number, and proof of date of purchase, package and return to:
HM Digital, Inc.
5819 Uplander Way
Culver City, CA 90230
Implied Warranties: Any implied warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to five years from date of purchase. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you. To the extent any provision of this warranty is prohibited by federal and state
law and cannot be preempted, it shall not be applicable. This warranty gives you specific legal
rights, and you may also have other rights, which vary from state to state.
NOTE: Warranties are product-specific. Third-party products and products deemed by HM
Digital as "accessories" are not covered under warranty. Third-party products include, but are
not limited to, batteries and fittings. Accessories include, but are not limited to, precipitator rods,
fuses, lanyards and product cases.
This manual and all information contained herein is copyright HM Digital, Inc.
WARRANTY
USER'S GUIDE
PH-200
pH / TEMP METER
PH-200 1/06
Advertisement
Related Manuals for HM Digital PH-200
Summary of Contents for HM Digital PH-200
- Page 1 The warranty does not cover water damage to the PH-200 due to parts not securely closed.) How to obtain warranty performance: Attach to the product your name, address, description of problem, phone number, and proof of date of purchase, package and return to: HM Digital, Inc.
- Page 2 OVERVIEW NOTE: Do not reverse the polarity of the batteries. This will short circuit the meter. Thank you for purchasing HM Digital’s PH-200 Meter. The PH-200 is an advanced handheld, Cleaning and sensor care: watertight pH meter with superior accuracy. It can be used for testing the acidity or alkaline levels of almost any liquid, in a wide variety of applications, provided the liquid contains less than 50% alcohol.
- Page 3 The PH-200 can take measurements of pH levels and temperature. Your PH-200 meter has been factory-calibrated to a 7.00 pH buffer solution. While this is suitable for most applications, it may be necessary to recalibrate the meter for more accurate pH Measurements results.
- Page 4 Button panel 3. Always immediately replace the cap when the meter is not in use. The PH-200 cap contains a Power button small wetted sponge to ensure that the gel within the glass sensor does not dry up. NOTE – A...
Need help?
Do you have a question about the PH-200 and is the answer not in the manual?
Questions and answers