Commands In This Section - Dell N1100-ON Reference Manual

Commands in this Section

This section explains the following commands:
mvr
mvr group
mvr mode
mvr querytime
mvr vlan
mvr immediate
mvr
Use the mvr command in Global Configuration and Interface Configuration
modes to enable MVR. Use the no form of this command to disable MVR.
Syntax
mvr
no mvr
Default Configuration
The default value is Disabled.
Command Mode
Global Configuration, Interface Configuration
User Guidelines
MVR can only be configured on physical interfaces.
mvr group
Use the mvr group command in Global Configuration mode to add an MVR
membership group. Use the no form of the command to remove an MVR
membership group.
mvr type
mvr vlan group
show mvr
show mvr members
show mvr interface
show mvr traffic
Layer 2 Switching Commands
605