Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Griffin Technology iTrip
Summary of Contents for Griffin Technology iTrip
- Page 1 MANUAL...
- Page 2 Thank you for purchasing the iTrip, the only wireless FM transmitter made specifically for the iPod. Now you can play your music in your car or anywhere there's an FM radio. We'll have you up and running in three easy steps.
- Page 3 Playing music through the iTrip automatically turns the iTrip on. The LED will blink as it's powering up. The iTrip is preset to 87.9 on your FM radio. To select your own station, follow the instructions that continue inside this booklet.
- Page 4 ) button. When the LED begins to rapidly blink, click the PLAY/PAUSE ( ) button once again. The LED light will pulse three times slowly to confirm the iTrip has changed its frequency successfully. NOTES & TIPS: The volume of your iPod needs to be between 40% - 80% for the iTrip frequency change to work correctly.
- Page 5 60 seconds. It turns back on when any music comes from the iPod. CHARGING YOUR iPOD WHILE USING THE iTRIP (Original iPod) To charge your iPod while your iTrip is in use, simply lift and rotate the iTrip a quarter turn counter-clockwise. Re-connect the iTrip perpendicular to the iPod by...
- Page 6 The higher the frequency, the longer the iTrip takes. So if you have iTrip tuned to 107.9 it may take a while. But be patient - it will come on. If your iTrip is still not responding, disconnect then reconnect the iTrip. Push down firmly to make sure it’s solidly connected to the iPod.
- Page 7 CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For more tips and tricks to help you get the most out of your iTrip, please visit Griffin online support at http://www.griffintechnology.com/support...
Need help?
Do you have a question about the iTrip and is the answer not in the manual?
Questions and answers