Philips AZ 1025 Owner's Manual page 12

CD PLAYER
PLAYING A CD
1. Adjust the CD TUNER TAPE/
2. Press OPEN to open the CD compartment.
3. Insert a CD with the printed side facing up and close the
compartment.
4. Press PLAY•PAUSE 2; to start playback.
5. To interrupt playback press PLAY•PAUSE 2;. To resume, press
PLAY•PAUSE 2; again.
6. To stop CD play, press STOP 9.
7. To switch off the set, adjust the slider to TAPE/
(with the cassette keys released).
Note:
CD playback will also stop when:
– the CD door is opened;
– the CD has reached to the end;
– you move the CD TUNER TAPE/
Selecting a different track
• Press the CD SEARCH controls ( ∞ or § , 5 or 6) once or
repeatedly until the required track number appears in the
display.
• If you have selected a track number shortly after loading a CD
or in the PAUSE position, press PLAY•PAUSE 2; to start
playback.
Finding a passage within a track
1. Press and hold down on the CD SEARCH control ∞ or § on
the set or 5 or 6 on the remote control.
™ The CD is played at high speed and low volume.
2. When you recognize the passage you want, release the
SEARCH control.
DIFFERENT PLAY MODES: SHUFFLE/REPEAT
You can select, change and combine different play modes before or
during playback.
• The play modes can also be combined with PROGRAM.
SHUFFLE - All tracks of the entire CD or program are played in
random order.
SHUFFLE/REPEAT ALL - Repeats the entire CD or program
continuously in random order.
REPEAT - Plays the current track continuously.
REPEAT ALL - Repeats the entire CD or program
1. To select your play mode, press SHUFFLE/REPEAT before or
during playback until the desired function appears in the
display.
12
slider to CD position.
OFF
OFF
slider.
OFF
position