Lan Mac Filter; Lan Ip Filter - Celcom E961 User Manual

3. Select other options as required, and then click

LAN MAC Filter

Your gateway supports MAC filtering based on a list of either denied or allowed computers.
A common method to restricting network access is to specify the Media Access Control
(MAC) address.
To locate the MAC address in Windows, choose Start > Run, and then enter cmd.
The command window is displayed, enter ipconfig /all, and then press Enter.
The MAC address is displayed as the Physical Address.
to access the LAN MAC Filter window.
1. Click
2. Select MAC Filter Mode.
Value
Disabled
Allow
Deny
3. Enter the MAC addresses of the clients and click

LAN IP Filter

You can configure the gateway to block specific IP addresses from accessing the LAN.
to access the IP Address Filter window.
Click
Adding an IP Address
1. Select the protocol and status.
2. Enter the IP address and corresponding port to be blocked from accessing the LAN.
3. Click to add the IP address to the table.
Modifying an IP Address
in the Modification column. The corresponding IP address filter is displayed.
1. Click
2. Modify the contents as required.
3. Click .
Deleting an IP Address
in the Modification column. The corresponding IP address filter is deleted.
Click
The MAC address filter function is disabled.
The clients with addresses in the MAC Address list are
allowed to connect with the gateway through the LAN.
The clients with addresses in the MAC Address list are not
allowed to connect with the gateway through the LAN.
.
Description
.
36