Panasonic PT-40LC12-K Operating Instructions Manual page 13

Cable Connection
Use this configuration when connecting the projection display to a cable TV system.
TERMINAL ON
THE BACK OF
THE CABLE BOX
In from cable
Notes:
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility require-
ments.
• For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (P. 24)
CABLE BOX
INPUT OUTPUT
Connect the cable from the antenna
or cable system to the VHF/UHF
terminal on the back of the
Projection display.
In from cable
Or
.
Installation
13