Error Message; Maintenance And Service - Bosch GLM 500 Professional Original Instructions Manual

OBJ_BUCH-3009-001.book Page 37 Thursday, October 13, 2016 11:47 AM

Error Message

If a measurement cannot be performed correctly, the
error message "Error" appears in the display. Switch
the measuring tool off and back on, and start the
measurement again.
The measuring tool monitors correct
functioning in every measurement. If a
defect is detected, the display will in-
dicate only the symbol shown oppo-
site and the measuring tool switches it-
self off. In this case, have the
measuring tool checked by an after-sales service
agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not
use any cleaning agents or solvents.
Maintain the reception lens 14 in particular, with the
same care as required for eye glasses or the lens of a
camera.
Bosch Power Tools
English | 37
1 609 92A 3F7 | (13.10.16)