CONTENTS OF PACKAGING HD WI-FI CAmErA DCS-936L POWEr ADAPTEr mOUNTING KIT QUICK INSTALL CArD If any of these items are missing from your packaging, contact your reseller. DCS-936L...
When you are asked to scan a QR code, use the code on the Quick Install Card in your package, or on the label attached to your device. Congratulations, your DCS-936L is now ready to use! Be sure to check the mydlink.com website periodically for the latest firmware updates to keep your product secure and up to date with the latest features.
PrODUCT SETUP ZerO CONFiGUraTiON SeTUP If you have a D-Link Cloud Router, you can take advantage of Zero Configuration Setup. This feature configures your camera’s settings for you and adds it to your mydlink account automatically. Step 1: Plug in the camera. Wait 2 minutes for the camera to boot up, then press the WPS button on your Cloud Router.
Use the supplied screws to attach the camera base to the surface of the wall. Step 6: Attach the camera to the camera base and pull the power cable to remove the extra cable. Adjust the angle of the camera as desired. DCS-936L...
This process will change all your settings back to the factory defaults. To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your camera is plugged in. DCS-936L...
Page 7
TeCHNiCaL SUPPOrT TeCHNiCaL SUPPOrT You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: D-Link middle East - Dubai, U.A.E. Tel: 1300-700-100 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au...
Need help?
Do you have a question about the DCS-936L and is the answer not in the manual?
Questions and answers