Error Messages / Troubleshooting; Specifications - Sanitas SBM 36 Instructions For Use Manual

8. Error messages / troubleshooting

In case of faults, the _ message appears in the display.
Error messages can occur when
1. It was not possible to record the pulse E1 ,
2. You move or speak during the measurement E2 ,
3. The cuff is fastened too tightly or loosely E3 ,
4. Errors occur during the measurement E4
5. The pump pressure is higher than 300 mmHg E5
6. The batteries are almost empty
In the above cases, you must repeat the measurement. Make
sure that the cuff tube is properly inserted and that you do
not move or talk. Re-insert the batteries if necessary, or else
replace them.

9. Specifications

Model no. SBM 36
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement range Cuff pressure 0 – 300 mmHg,
systolic 50 – 250 mmHg,
diastolic 30 – 200 mmHg,
Pulse 40 – 180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement inac- Max. permissible standard deviation
curacy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
E6
Dimensions
Cuff size
Permissible operating
conditions
Permissible storage
conditions
Power supply
Battery life
Accessories
Classification
Technical information is subject to change without notification
to allow for updates.
• This unit is in line with European Standard EN 60601-1-2 and
is subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable and
mobile HF communication systems may interfere with this
unit. More details can be requested from the stated Customer
Service address or found at the end of the instructions for use.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EC, the „Medizinproduktegesetz" (German Medi-
cal Devices Act) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
21
L 98 mm x W 140 mm x H 53 mm
22 to 36 cm
+10 °C to +40 °C, 30%- 85 % relative air
humidity (non-condensing)
- 20 °C to +60 °C, 10%-95% relative air
humidity, 700 –1060 hPa ambient pres-
sure
4 x 1,5 V AAA batteries
For approx. 500 measurements,
depending on the blood pressure level
and/or pump pressure
Instruction for use, 4 x 1.5 V AAA batter-
ies, storage pouch
Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part