Table of Contents
Advertisement
Unless otherwise noted, all wiring shall be a minimum of 22 AWG. Refer to the Interconnect drawing for additional
specifications. Check that the ground connection is clean and well secured.
2.4.3
Mechanical Installation
The JA77-005 can be mounted in any attitude and location with adequate space for the front panel and sufficient
clearance for the connector and wiring harness. It requires no direct cooling.
2.4.4
Legend Replacement
The JA77-005 illuminated legends are field replaceable. For further information, refer to the
document in Appendix A of this manual.
2.5
Legend Text Selection using ProCS™
The JA77-005 has no required adjustments, but the configuration program ProCS™ can be used to customize the text
for each legend either at the time of ordering the unit, or if text changes are required after installation. The JA77-005
need not be connected to a computer to select the legend text.
For information on ordering customized legends, refer to the
2.5.1
Front Panel Switches
The Front Panel Switches window is used to specify the text for each legend.
Clicking on a customizable legend will open a drop-
down menu listing the options for that label. The
currently selected option will be highlighted. To escape
from the menu, click on the desired option, or right-click
in the window. A 'Print...' box will appear. Click outside
the box to escape, or select it to print the 'Front Panel
Switches' window showing the current label selections.
In the example shown here, the option 'New...' has been
selected. A pop-up 'New Label' window will appear,
allowing the user to create a customized legend – in this
case, JAC. The new legend name will now be shown in
the appropriate position on the faceplate representation
in the software program.
Rev B
JA77-005 Switch Plate with Removable Legends
Installation and Operating Manual
ProCS™ Ordering Instructions
Among the options is '- - - -' which signifies that
the legend will be left blank, and 'New...' which
allows the user to enter a completely new
legend of up to five characters. If a 'new'
legend has been added, the option 'Edit ...' is
added to the menu to enable changes to the
newly created label.
'Legend Replacement'
on the
JAC website.
Page 3
Advertisement
Table of Contents
Need help?
Do you have a question about the JA77-005 and is the answer not in the manual?
Questions and answers