Panasonic MW-20EB Service Manual page 25

7.2.1. Doctor Mode Table 1
Caution : Use MW-10 remote control for respective tests after entering into Doctor Mode. Refer to MW-10 Service Manual
for remote control information.
Mode name
LCD&LED Test
To check all the lights of LCD
and LED.
Volume setting
To check for the volume setting
at 20dB, 10dB & 0dB.
Note : This mode is not possible
when iPod is not connected (No
iPod devices).
Item
Description
FL display
The lights of LCD and LED will changes
each time [1] on remote control is pressed.
LCD LED
Normal status Normal status
Press [1]↓ Press [1]↓
LCD lights up in white All LEDs light up
Press [1]↓ Press [1]↓
LCD lights off
All LEDs light off
Press [1]↓ Press [1]↓
LCD lights up in black
All LEDs light up
Press [1]↓ Press [1]↓
Normal status Normal status
iPod must be connected. If not,
LCD will display NO DEVICE.
Remark: Please check both
speaker output
The value of set volume is shown on the
display when each button mentioned on
the right is pressed.
25
Key operation (Remote control)
In Doctor mode, press [1] on remote
control.
Step 1 : In Doctor mode, press [7]
on remote control.
Step 2 : In Doctor mode, press [8]
on remote control.
Step 3 : In Doctor mode, press [9]
on remote control.