Reset Button; Led Indicators; Reset To Factory Default Settings - Moxa Technologies SDS-3008 Series Quick Installation Manual

Reset Button

The reset button can perform two functions. One is to reset the industrial
smart Ethernet switch back to factory default settings and the other is to
perform a quick back up of configuration and log files to the ABC-02-USB
automatic backup configurator.

Reset to Factory Default Settings

Use a pointed object, such as a straightened paper clip, to depress and
hold the reset button for 5 seconds. This will cause the state LED to blink
once a second. After depressing the button for 5 seconds, the state LED
will start to blink rapidly. This indicates that factory default settings have
been loaded and executed, and that you can release the reset button.
NOTE Do NOT power off your Moxa industrial smart Ethernet switch
when the default settings are loading.
Configuration and Log Files Back Up
When the ABC-02-USB is connected to the industrial smart Ethernet
switch, the reset button allows for a quick back up of configuration and
event logs to the ABC-02-USB. Press the reset button on top of the
SDS-3008 in order for the industrial smart Ethernet switch to start
backing up the current system configuration files and event logs to the
ABC-02-USB.
NOTE When the ABC-02 is plugged in, you can't reset to factory default
by pressing the reset button.

LED Indicators

LED Color
PWR 1 Amber
PWR 2 Amber
STATE Green
Red
Status Description
Per Device LED
Solid light Power is being supplied to the
main system's power input PWR1
Light off Power is not being supplied to the
main system's power input PWR1
Solid light Power is being supplied to the
main system's power input PWR2
Light off Power is not being supplied to the
main system's power input PWR2
Solid light System has passed self-diagnosis
test on boot-up and is ready to run
Blinking 1. System is undergoing the
self-diagnosis test
2. System detects that the
ABC-02-USB is plugged in and has
been detected by the USB port
3. Blinks continuously when the
reset button is pressed for 5
seconds to reset to factory default
settings
Solid light System failed self-diagnosis on
boot-up.
- 12 -