Summary of Contents for AeroScout TAG-3500
- Page 1 AeroScout AeroScout T3 T3- - - - BD AeroScout AeroScout Model: TAG-3500 Bidirectional Tag Bidirectional Bidirectional Bidirectional User Guide T3-BD-UG-50707-04...
- Page 2 The information and know-how included in this document are the exclusive property of AeroScout Inc. and are intended for the use of the addressee or the user alone. The addressees shall not forward to another their right of using the information, know-how...
-
Page 3: Table Of Contents
Option 1 – Tamper Switch Pressed against Surface (without Cradle).......11 Option 2 – Tamper Switch Pressed against Surface (with Cradle)......12 Tag Management .................... 12 Managing Tags Using AeroScout Tag Manager ............12 Automatic Tag management Through the Wi-Fi Network .........12 Tag Maintenance .................... 13 Upgrading the Firmware....................13... -
Page 5: Introduction
Introduction | 5 Introduction The AeroScout T3-BD tag is a key component of the AeroScout Visibility System. The T3-BD tag is a small, Wi-Fi, active RFID device that enables the wireless network infrastructure to locate assets not connected to a wireless network. - Page 6 6 | T3-BD Tag Features Audio Visual Indications The tag includes 2 LED’s in 3 colors, a buzzer and a vibrator. These audio visual indicators can be activated from the network to provide the acknowledgement response in the tag as mentioned in the previous clause. Flexible Mounting and Usage Options The tag is supplied with a variety of mounting options.
- Page 7 The T3-BD tag can store up to 15 messages of 15 bytes each. These messages can either be pre-programmed via the Tag Manager or programmed on the fly by an AeroScout Exciter when a tag is in proximity to it. These messages can also be transmitted in addition to the standard...
-
Page 8: Tag Mounting
8 | Tag Mounting Tag Mounting The AeroScout T3-BD tag is enclosed in a compact case and offers a variety of mounting options described in this section. Single Flange The T3-BD tag may come with a single flange on one of the narrow sides (the “top”... -
Page 9: No Flange
Cradle The AeroScout T3-BD tag cradle can be used to incorporate the tag in existing equipment. The cradle is fixed on the asset (e.g. a machine) and the tag is snapped into the cradle. With the cradle, tags can be easily removed... - Page 10 10 | Tag Mounting Figure 6. AeroScout T3-BD tag cradle: front view Figure 7. AeroScout T3-BD tag cradle: back view To mount a cradle and place a rag in it: Do one of the following: To attach the cradle on a flat surface with (four) screws: Use the four holes on the sides.
-
Page 11: Mounting The Anti-Tempering Device
The removal of the tag releases the switch and causes the tag to send an alert to the AeroScout System Manager. The anti-tampering device is especially designed for use with objects (and not human beings or animals). -
Page 12: Option 2 - Tamper Switch Pressed Against Surface (With Cradle)
The AeroScout T3-BD tag can be configured, programmed and activated via a wireless interface (including anti-tampering device enabling). This is done with the help of the AeroScout Tag Manager version 4.0 (and later) and the AeroScout Tag Activator. In addition, Tag Manager is used to activate and deactivate tags and to program stored messages on the tags. -
Page 13: Tag Maintenance
Wi-Fi network. This is possible due to the tag’s bidirectional communication abilities. This is done by using the AeroScout Bidirectional Tag Controller application. This application can automatically upgrade the firmware to all the tags in the site, through the Wi-Fi network. The actual update for each tag will take as much time as the interval set into the tag for periodic network association. - Page 14 14 | Tag Maintenance WARNING: Use only batteries listed in Table 1 or batteries that have been approved by AeroScout. There is a danger of fatal tag damage if the battery is replaced incorrectly or by an incorrect type. Dispose used batteries according to the instructions.
-
Page 15: Tag Battery Life
Please use the AeroScout Tag Manager in order to evaluate the battery life that is obtained with your setup. T3-BD Tag Models... -
Page 16: Tag Specifications
2’’ diameter Tie wraps for cradle – up TAC-061 to 5’’ diameter T3-BD tag housing Empty T3-BD tag housing TGH-305 with AeroScout logo Tag Management Tag Activator (US) Includes 110/220v to 5v adapter (US) BWH1000-02-TA Tag Activator (Europe) Includes 110/220v to 5v... -
Page 17: Environmental Specifications
Tag Specifications | 17 Clear channel sensing avoids interference with wireless networks • Accessories Motion Sensor • 2 Call buttons • 2 LED’s (single color + dual color) • Optional tamper proof switch • Optional vibrator • Optional buzzer • Optional temperature sensor •... -
Page 19: Warranty
The date of shipment of a Product by AeroScout is set forth on the packaging material in which the Product is shipped. This limited warranty extends only to the original user of the Product. - Page 20 20 | DISCLAIMER OF WARRANTY. EXCEPT AS SPECIFIED IN THIS WARRANTY, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, SATISFACTORY QUALITY OR ARISING FROM A COURSE OF DEALING, LAW, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW.
Need help?
Do you have a question about the TAG-3500 and is the answer not in the manual?
Questions and answers