INSTRUCTION MANUAL CP21AF2X CP29AF2X Colour Television Flat Screen CATV Hyper Band 100 Programmes with Automatic Tuning AV Stereo Sound System (AV stereo sound system can reproduce a stereo sound only when a stereo signal is inputted from audio input jacks of the AV terminal.)
Contents Multi Personal Preference Level Function Plug & Play ....3 For position 1 through to position 30, the Aerial Connection ....3 picture settings (Colour, Brightness and Front Controls .
Plug & Play Aerial Connection Automatic setting up channels Connecting Outdoor Aerial Connect the cable with a plug from a UHF This TV set provides a self-automatic tuning (or VHF) aerial to the aerial socket on the and sorting system function called “Plug & cabinet back.
Each button listed in this section has the same function as it’s Front Controls corresponding button on the remote control. Model CP21AF2X Pull to open MENU TV/AV Mains ON/OFF Button VOLUME Selector Remote Control Detector Programme Stand-by and Power Indicator...
Warnings and Cautions Caution Warning When the television receiver is not used for High voltages are used in the operation an extended period of time, it is advisable to of this television receiver. Do not remove disconnect the AC power cord from the AC the cabinet back from your set.
Remote Control Transmitter SOUND MUTE TIMER TV/AV Selector The selected mode will switch TV/AV TIMER alternately between TV mode POWER ON/OFF and AV mode each time the TV/AV Selector is pressed. Digit Programme Selector -/-- RECALL / BASS COLOUR SYSTEM BASS SURROUND SURROUND...
General Operation Direct Programme Selection Power ON/OFF Example To switch on or off the TV ; To select programme position 8; Press the Mains ON/OFF button. The power of the TV is turned on or off com- pletely. If no picture appears but the Standby and Power indicator illuminates, press the Power ON/OFF button of the remote control transmitter as the TV set is in standby...
General Operation Volume Control Quick Picture Controls Press the PICTURE MODE button to select Increase or decrease the sound volume the following picture modes; “PERSONAL”, level by pressing the VOLUME (+ or -) ”DYNAMIC”, ”NATURAL”, “ECO” and buttons. “GAME”. Select picture modes to suit pic- SOUND BASS ON ture type you are watching.
General Operation Press the VOLUME ( + or - ) button. OFF TIMER The set time will be increased or decreased by 10 minutes each time The OFF TIMER will switch off the TV auto- the button is pressed ; the maximum matically after 30 minutes, 1 hour, 1 hour time which can be set is 24 hours.
Picture Adjustment When “PICTURE” is not selected, select Picture Adjustment Menu “PICTURE” with the Programme UP or DOWN button. COLOUR BRIGHT CONTRAST TINT SHARPNESS PICTURE PICTURE FINE TUNING A U D I O A U D I O IIIIIIIIIIIIII----------- PRESET PRESET SELECT ADJUST...
Audio Adjustment Audio Adjustment Menu Press the VOLUME + or - button for Audio Adjustment menu display. BASS TREBLE BASS BALANCE TREBLE BASS EXPANDER OFF BALANCE SURROUND OFF BASS EXPANDER OFF SURROUND OFF -----------I----------- -----------I----------- SELECT ADJUST BACK EXIT SELECT ADJUST BACK EXIT...
Tuning of the Channels Up to 100 broadcast stations in your Press the VOLUME + or - button for reception area can be stored in the PRESET menu display. On entering electronic memory. PRESET display, Automatic Tuning will be selected initially. There are three ways of tuning as follows;...
Tuning of the Channels It is also possible to select the Programme posi- Semi-Auto Tuning and Manual Tuning tion number by pressing either of the VOLUME + or - button. In this case, select “POSITION” with Press the MENU button for MAIN menu the Programme UP or DOWN button first, then display.
Tuning of the Channels Channel Swapping Channel Copy Use this channel swapping feature to swap the This function can be utilized after Automatic channels between two stored programme Tuning. position. This feature is particularly useful after For example, to copy a TV channel on automatic tuning.
Tuning of the Channels Skip Channel Set and Cancel Select “MEMORY” by pressing the PROGRAMME UP or DOWN button, When there is a position you do not use, Position 4 then press the VOLUME + or - button for example, by setting the SKIP Channel function for memory.
Setting of the Private Position Private position is used to restrict of pro- To view a programme on Private Position gramme positions that you do not want others to watch. Select private position (In this case Any position can be set as the Private position “15”).
Connecting other Equipment Connecting to the Rear AV1 Input Jacks Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of this TV set . Tapes and discs can be played back. MONITOR AV1 INPUT PLAYBACK To video and audio outputs...
Connecting other Equipment You can select a TV programme while watching a playback from a VCR For example: G To select programme position “9” while watching a playback from external VCR, press “9” button of the remote control. The TV set returns to the TV mode and programme “9” will be selected.
Connecting other Equipment Connecting to the Front AV2 Input jacks It is convenient to use the AV2 input jack on the front panel for equipment that is often connected and disconnected. I To watch the Front AV2 video input picture, select AV2 position by pressing the TV/AV Selector.
Connecting other Equipment Connecting to the Monitor Output Jacks The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals.
Helpful Hints - Problems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: G Check if TV is plugged in. No picture, G Try a different channel, if OK, probably station trouble. no sound G Adjust Brightness or Contrast control.
Aerial input impedance 75 Ω Audio output (RMS) 5W + 5W Speakers Model CP21AF2X: 5 cm x 12 cm x 2 pcs. Model CP29AF2X: 6 cm x 12 cm x 2 pcs. Ext. terminals Video Inputs: Phone Jack x 2 (1.0Vp-p, impedance 75 Ω) S-Video Input x 1 (Din 4 pin, Separate Y/C Signals Input) Audio inputs: Phone Jack (L/R) x 2 (436mVrms, impedance more than 40KΩ)