Table of Contents
Related Manuals for Markem Imaje 9410
Summary of Contents for Markem Imaje 9410
- Page 1 Instruction manual the team to trust 9410 9450 Safety Printer and interface overview Starting / shutting down the printer Sending a job for printing Modifying a job Consulting the history Replacing the consumables Head cleaning Troubleshooting - Information...
-
Page 2: Ec Declaration Of Conformity
Regulatory Compliance Manager Markem-Imaje Industries ___________________________________________________________________________________ Markem Imaje Industries 9, rue Gaspard Monge - BP 110 - 26501 Bourg-lès-Valence Cedex France Markem-Imaje SAS 9, rue Gaspard Monge – BP 110 – 26501 Bourg-lès-valence Cedex France Tél. : +33(0)4 75 75 55 00 - Fax : +33(0)4 75 82 98 10 - www.markem-imaje.com Tel. - Page 3 Safety Before using this printer, please read and fully comply with these instructions, the material safety data sheet (MSDS) for consumables used, and safety labels affixed to the printer. Servicing must be performed only by qualified people who are appropriately trained. ■...
- Page 4 Safety ■ Health / Hygiene / Environment For certain consumables: □ Wearing contact lenses when handling these consumables is strictly prohibited. □ Ink-resistant gloves and safety goggles are recommended during cleaning operation. Max. noise level < 70 dB A. Operating temperature : +5°C to +40°C (+41°F to +104°F) Humidity: 0 - 90% RH with no condensation.
- Page 5 Safety ■ Handling When a printer contains consumables, it may only be moved in a vertical position, over a short distance (e.g. within a workshop). Completely drain the printer before moving it in a position other than vertical, or if it is to be transported for a longer distance (e.g.
- Page 6 Safety For information on fastening a Markem-Imaje accessory, refer to the assembly instructions delivered with it. The printer must be placed on a perfectly horizontal and unimpeded surface (the underside of the printer must not be obstructed). The bottom of the console must be between 0.7 m and 1 m above floor level.
- Page 7 Safety • On base 3 x FHc M6-16 2 x CHc M6-12 Stabilizer weights (x 2) mandatory. They can be mounted above. H M6 3 x O6 2 x H M6 CHc M6-25 CHc M6-75 • Wall-mounted 6,2 mm 0.24 in 156 mm 8 mm 6.14 in...
- Page 8 Safety ■ Use The printer is designed for contact-free printing by projecting ink. Any other use of the printer is prohibited, and any consequences shall be under the entire responsibility of the user. ■ Servicing We recommend that maintenance work be carried out only by staff who have received technical training from Markem-Imaje and who have the appropriate personal protective equipment (safety shoes, glasses, gloves, etc.).
-
Page 9: Fcc Rules
Safety These symbols indicate that the electrical and electronic device, and the batteries and rechargeable batteries therein, must not be disposed of at the end of its life as ordinary municipal solid waste. By ensuring that these items are disposed of appropriately, you play an active role in avoiding the harmful consequences that incorrect disposal could have on the environment and human health. -
Page 10: Printer Integration
Safety communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For Canada : Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. - Page 11 Responsable Normalisation/homologation Markem-Imaje Industries Regulatory Compliance Manager Markem-Imaje Industries ___________________________________________________________________________________ Markem Imaje Industries 9, rue Gaspard Monge - BP 110 - 26501 Bourg-lès-Valence Cedex France Tél. : +33(0)4 75 75 55 00 - Fax : +33(0)4 75 82 98 10 - www.markem-imaje.com A44200-A...
- Page 12 Printer overview Hydraulics compartment Cabinet Power-On LED Operator interface Umbilical Print head Instruction manual...
- Page 13 Printer overview Manufacturer’s plate Plant air connector Cable glands: other USB Port connections (Serial/Parallel SD card reader Link) Access to the electrical Air filter (model IP56) compartment 10 Connection interface Additive cartridge - detection cell (black) - encoder (blue) - warning (yellow) 11 Cable glands: Ethernet Ink cartridge 12 Umbilical outlet...
Need help?
Do you have a question about the 9410 and is the answer not in the manual?
Questions and answers