Line Locating Mode - Ditch Witch 750 Tracker Operator's Manual

Hide thumbs Also See for 750 Tracker:
Table of Contents

Advertisement

750/752 Tracker - OPERATION

LINE LOCATING MODE

LINE LOCATING MODE
To locate power lines, select the following:
line locating mode
frequency (50 Hz power, 60 Hz power, or 8 kHz active)
IMPORTANT: Transmitter is required to locate 8 kHz.
Setup
If you are locating a line with the help of a transmitter, connect
transmitter as directed in transmitter operator's manual. Select
frequency at transmitter to match tracker frequency.
Location
To locate a line:
1. Sweep suspected area of line location.
2. Strongest signal indicates location of line.
3. Take depth reading.
33
750/752 Tracker - OPERATION
LINE LOCATING MODE
LINE LOCATING MODE
To locate power lines, select the following:
line locating mode
frequency (50 Hz power, 60 Hz power, or 8 kHz active)
IMPORTANT: Transmitter is required to locate 8 kHz.
Setup
If you are locating a line with the help of a transmitter, connect
transmitter as directed in transmitter operator's manual. Select
frequency at transmitter to match tracker frequency.
Location
To locate a line:
1. Sweep suspected area of line location.
2. Strongest signal indicates location of line.
3. Take depth reading.
33

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 750 Tracker and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

752 tracker

Table of Contents