Tools Required; Caster Installation; Hardware Included; Removing Drawers - Craftsman 33511 Operator's Manual

TOOLS REQUIRED:
3/8-in wrench
HARDWARE INCLUDED:
1/4 - 20 x 5/8-in (Qty: 16)
1/4- 20 Nut (Qty: 16)
NOTE: Not all assembly instructions will relate to your model.
CASTER iNSTALLATiON
items Needed:
1/4 - 20 x 5/8-in (Qty: 16)
1/4 - 20 Nut (Qty: 16)
3/8-in Wrench
Process:
• Remove bottom drawers. (See Operation Section, Part
A.)
• Lay the cabinet on its back. Use packaging material to
protect the finish.
• Mount both swivel casters on the same side of the unit.
• Attach the casters using four screws and nuts per caster.
• Wrench tighten all screws. It is recommended not to
exceed 80 inch pounds of torque.
• Return the unit to its upright position.
• Reinstall bottom drawers. (See Operation Section, Part
B.)
Cabinet:
Literature
Caster pack
Screw
Caster pack
REMOVING DRAWERS
• Empty the drawer.
• Fully extend the drawer.
Release