Sony DMX-WL1 Reference Manual page 9

G:\Work\SONY\TV\847342S DMX-WL1T\0724\387708311DMX-
WL1\030GET.fm
010COV.book Page 9 Thursday, July 24, 2008 2:04 PM
Item
q; IN 2/3/4 HDMI
qa IN 1 HDMI
R-AUDIO-L
qs DIGITAL AUDIO
OUT (OPTICAL)
qd SERVICE
Description
Connects to HDMI equipment, such as a set-top box, DVD player, Blu-ray Disc Player or
AV receiver.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the IN 1
HDMI (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of IN 1 HDMI.
When inputting the HDMI signal without audio, be sure to also connect an audio cable.
DVI-to-HDMI cable
DVI-to-HDMI adapter
~
• These units support 480i, 480p, 720p and 1080i formats. The 1080p format is not
supported.
• Be sure to use only an HDMI cable that bears the HDMI logo.
• PC input is not supported with these units.
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby
Digital compatible. This unit supports Linear PCM and compressed audio format, such as
Dolby Digital Audio, DTS audio, with a maximum bitrate of 3 Mbps or less. If the
connected equipment and TV support compressed audio formats, the TV will output
compressed audio format when using these units.
This jack is for service only.
masterpage:Right
Audio cable
9
DMX-WL1
3-877-083-11(1)