Waste Toner Is Almost Full/Full - Ricoh SP 4510DN User Manual

3. Troubleshooting
Message
"Toner Cartridge is almost
empty. Replace Toner
Cartridge."
"Tray setg. do not match spcfd
siz&typ. Select new tray or use
sz&typ below."
"Failed to update @Remote
certificate. Please call service."
"Waste Toner is almost full"
"Waste Toner full"
"You do not have the privileges
to use this function."
82
Cause
The print cartridge is almost
empty.
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
Updating the @Remote
certificate failed.
The print cartridge must be
replaced when the life of the
waste toner is ending.
The waste toner is full.
The logged in user name does
not have permission for the
selected function.
Solution
Prepare a new print cartridge.
• Check that the printer
driver settings are correct,
and then load paper of the
size selected in the printer
driver into the input tray.
For details about how to
load paper, see page 37
"Loading Paper".
• Select the tray manually to
continue printing, or
cancel a print job. For
details about how to select
the tray manually, or
cancel a print job, see "If
an Error Occurs with the
Specified Paper Size and
Type", Operating
Instructions.
Turn the printer off, and then
turn it on again. If the problem
persists, contact your sales or
service representative.
Prepare a new print cartridge.
Replace the print cartridge. For
details, see "Replacing the Print
Cartridge", Operating
Instructions.
For details about how to set
permissions, see Security Guide.